• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Wmoater

    What size Trailer to Haul Two Spyders? What ramp angle?

    Need more information. First what are you pulling these 2 spyders and trailer with? What is the rating of trailer? 2 spyders are say 2999 not including the weight of trailer which will be at least 400 lbs. check tongue weight capability of vehicle. It will need to be double axle at least 3500...
  2. Wmoater

    What Rear Axle Nut Wrench are you using?

    Speaking of Napa and Advanced, depending on the store and if you have an account with them, sometimes if you are only going to use the tool one time you can rent/ borrow the tool needed. It costs like $1.50 total. You put the tool value deposit down and receive it back once it’s returned. I’m...
  3. Wmoater

    2024 ShowChrome has 2020+ 3-in-1 rear lights! (Brake, Turn, and Flasher)

    I really like the Lamonster 3-in-1 brake/run and flasher lights for the older version RT's. (I believe it was ShowChrome but can’t remember) These are apparently the new lights for the new version 20+ series. I’m sure Lamonster will be carrying them too, but thought I’d share...
  4. Wmoater

    Need input/ideas on how/where to put a Go Pro Mount?

    Look at this mount fat gecko dual-suction camera mount. Check out tackform too! I know there’s a gentleman called rapidcity on this forum that used it a while back. I used it on my sled but again found a better option for sleds.
  5. Wmoater

    Need input/ideas on how/where to put a Go Pro Mount?

    GoPro makes a suction cup design many others have used. Google search “GoPro mounts spyderlovers” I did try it on my snowmobile and SXS and it did work but I personally like the square clamp and rod setup for those 2 now. Depending on your model, it’s not listed, might want to make that as part...
  6. Wmoater

    Need input/ideas on how/where to put a Go Pro Mount?

    South Dakota, Wyoming, Nebraska, Colorado, Kansas, Iowa area? That means lots of bugs and pests which means lots of splatters any time of the year. Mine is mounted behind the windshield for that reason. I have riden tens of thousands out there and this summer was one of the worst we ever had. We...
  7. Wmoater

    Got a PedalBox, getting VSS Fault & Limp Mode msg - any ideas/fixes?

    When did you buy yours bigpoppa? I betting between January and June of this year? Are you getting a P0122 error? Did you disconnect it? First, turn off your Spyder all together and remove the PB. Hook up your OEM AND TURN ON. Then Turn off and disconnect OEM and Connect the PB. Turn the key...
  8. Wmoater

    Got a PedalBox, getting VSS Fault & Limp Mode msg - any ideas/fixes?

    I personally have no problems with the pedal box product. I have several friends that have had no issues at all. I even spoke with many people at rallies that have them and no problems. I think my problem and possibly QuickDraws was a fluke. I was told that the exact problem has been reported...
  9. Wmoater

    Got a PedalBox, getting VSS Fault & Limp Mode msg - any ideas/fixes?

    Hate to say this QuickDraw but get rid of that PB and throw it out. mine was perfect for 7 months. All the sudden I get serious errors and finally P0122 error. It fried my TAS. I had my PB tested by a very reputable person. For sure the 3rd pin white wire is shorted. It was in my frunk at all...
  10. Wmoater

    What would this Ticking sound in the wheels be? 2022 S2S

    All times or when letting off throttle? If constant might be crap in brakes. Not uncommon. Is when letting off could be belt cogs hitting the top of the floor board bracket. Sounds like a card in a bicycle spoke?
  11. Wmoater

    2015 F3 with Fault code P0122 - where is the TAS ECM?

    The sensor is located inside the right twist throttle handle/ body housing. It is built into the cruise control and heating grip harness. Heated Throttle Grip Assembly shown on the Steering Diagram - 709402720. The sensor is not separated it can’t be removed from what I saw.
  12. Wmoater

    2015 F3 with Fault code P0122 - where is the TAS ECM?

    Disconnect the 6 pin connector first. clean and connect. Next turn bike off, turn key on without engine started and turn throttle. You should hear a ringing noise. Turn that throttle slowly 5 times and turn key off. (Basically reprogramming the throttle sensor) See if Code comes on. Next pull...
  13. Wmoater

    2015 F3 with Fault code P0122 - where is the TAS ECM?

    I am going through this right now. First look at the 6 pin connector connector on the right side of your bike. Watch lamaonster’s video on the pedal box. That connector remove the safety lock pin and pull apart. Make sure they are all clean and tight. Next in line, the TAS is located inside the...
  14. Wmoater

    Rear ended on the way to OC bike fest

    Clover, I understand your feeling right now about questioning riding and types of rides and even your wife as a copilot! I was a snowcross racer for many years. I never once, in those years, got into any major wrecks. Yes smashed sleds and thrown off but nothing traumatic. I was also a mountain...
  15. Wmoater

    Rear ended on the way to OC bike fest

    That’s terrible clover. I know when I hit my deer you gave all kinds of support and advice on the rebuild with positive feedback that it would look as new when completed. I hope you feel better and glad you had the protection on. I know you got hit and in multiple ways, car, objects etc but glad...
  16. Wmoater

    Serious errors P0123, P2135, P284E, P2806. Please help

    Excellent catch! You nailed it. Looking at the picture that is it in drawing. I also just googled it and got a few used pictures of different models but I know thats it! First the number has been superseded which mixed me up because on the 2016 that diagram is different and it should be the same...
  17. Wmoater

    Serious errors P0123, P2135, P284E, P2806. Please help

    Guys need some serious help here. This makes no sense to me and even my dealer is scratching his head. When looking at the twist housing which I guess controls the throttle and adjusts “speed” (refer to that speed part later?) We ordered part number 710004583 which holds the sensor 1 (throttle...
  18. Wmoater

    Should I be checking pressure in the Rear Suspension Air-bag? '19 F3 Ltd

    Chicago I can work you through this. I just had to do it on mine. My airbag needed replaced totally. It had a bunch of holes. First strip the entire left and right side panels off. I made it simple for myself. If the bag is bad remove the shock and exhaust. If the bag is good then you are...
  19. Wmoater

    Who's planning to go to Maggie Valley Spyder Adventures 2023?

    Netzley is suppose to be there. They usually are. They can laser align, deactivate dess, instal any accessories and tires! Make sure to register to get in the major door prize handout. There’s always 3 or so FREE alignments handed out. Good luck!
  20. Wmoater

    Anyone had Front Wheel Bearings wear out?

    On dads old RTL- 2015 special addition, he had 110,000 when he traded it in. He never had the fronts done. Rear once around 80K. They started whining pretty loud. It solely saw Arizona, New Mexico and Nevada highways which is very smooth and no tar chip and high temps. All asphalt and cement...
Back
Top