• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. DickB

    Is there a good source for Lower grill panels, hopefully OEM?

    I recently bought this 2014 RSS with many body parts missing due to a minor crash. Here's how I found parts. Look up part numbers here: https://epc.brp.com/. Do a search on the part numbers that you need. You will get hits on new parts if available and used parts on eBay. Many of the new parts...
  2. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    As per my earlier post, there is an electronic switch (probably a MOSFET) in the TCM that makes a ground connection to activate the solenoid. Because this electronic switch has a high impedance path to ground when it is off, you are going to see 12V with a meter connected to Pins 1 and 8 as you...
  3. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    The solenoids are activated by current. For the forward shift solenoid, battery voltage is present at Pin 1. Pin 8 is open. To activate the solenoid, the TCM connects Pin 8 to ground to complete the circuit. If you connect a test light to Pins 1 and 8, you should see a flash of light when the...
  4. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    So oil pressure is likely fine. Your test results puts the forward shift solenoid in question, or some electrical problem with the forward shift solenoid. I would try to test for voltage to that solenoid when it should be activating.
  5. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    I think you need to use one that will bleed the line. Maybe you can find another. I would start with verifying that the solenoids are working before moving on to suspect low oil pressure. If you got an inexpensive gauge, like this one...
  6. DickB

    Where can I buy 2013 Spyder Limited body plastic?

    I recently bought this 2014 RSS with many body parts missing due to a minor crash. Here's how I found parts. Look up part numbers here: https://epc.brp.com/. Do a search on the part numbers that you need. You will get hits on new parts if available and used parts on eBay. Many of the new parts...
  7. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    From what I understand, what you call the "return" line is connected to a valve to bleed the gauge's oil line. Per my maintenance manual, the test is to read the pressure while the clutch is activating. If you test with air in the line, the reaction time of the gauge is slowed, as the air in the...
  8. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    Remove the spaces from the part numbers when searching: https://www.colonialpowerandsport.com/brp-hydraulicpressuregauge-529036142.html
  9. DickB

    2014 Can Am Spyder RSS SE5 project

    The problem is the drain plug hex is "stripped" so I can't get the correct size wrench inserted. I could try forcing one in with a hammer. I may also try cutting a slot in the plug with a Dremel and use a manual impact tool with a screwdriver bit.
  10. DickB

    2011 RS SE5 Won't start/shift to Neutral - anyone have shifter wiring schematics?

    That's exactly the way it works. Based on all that you have said and we discussed, it would be good to check the oil pressure.
  11. DickB

    New Owner of a 2022 Spyder RT - Trying to decide on navigation aids?

    Garmin Zumo for sure.
  12. DickB

    What does it feel like when the Nanny takes over?

    I had an issue on my Ryker where the nanny would kick in on left turns way before right turns due to equipment failure. It felt like a wobble, most likely one front wheel brake pulsing and possibly reduced power to the rear. Did not really feel like loss of steering control, but then the Ryker...
  13. DickB

    North Central Florida man needs help from someone with BUDS

    I am willing to help. Send me a private message and we can exchange phone numbers. Who knows, I may just decide to take a ride up to Ocala!
  14. DickB

    2014 Can Am Spyder RSS SE5 project

    I got the rear tire mounted and balanced and reinstalled. I've driven a few times and ran into a few problems. I did an oil and filter change. The oil tank drain bolt was really stuck. I was using a 3/8" drive ratchet to remove it, and I thought that I was going to break the wrench. It finally...
  15. DickB

    North Central Florida man needs help from someone with BUDS

    I'm in Lake Placid, about 150 miles, have BUDS. I generally agree with you, but sometimes you do need BUDS. I needed BUDS to fix problems on both my Ryker and Spyder. The Ryker had a bad SAS (Steering Angle Sensor) and BUDS was necessary to both diagnose the problem and calibrate the...
  16. DickB

    2014 Can Am Spyder RSS SE5 project

    I'd try bolting a piece of aluminum or steel strip to that broken tab, also use some JB Weld - I'm guessing there is enough room to do that.
  17. DickB

    2014 Can Am Spyder RSS SE5 project

    The Spyder came with this nice passenger backrest, but as my spouse would not be caught dead on a motorcycle it probably won't get much use. I fabricated this rack for a cleaner look and a bit more cargo capacity. 1/8" aluminum plate, 3/4" x 1/16" aluminum strip, textured black rattle can...
  18. DickB

    Where besides dealers do you get tires mounted and balanced?

    -----
  19. DickB

    Where besides dealers do you get tires mounted and balanced?

    I ended up taking it to a dealership. They needlessly put on all this weight. I told them "but I read on the internet...", but they were unimpressed. BTW for those who may be following, they needed the hub and brake rotor attached to properly balance.
  20. DickB

    2014 Can Am Spyder RSS SE5 project

    The front frame finally arrived, and I was able to install the remaining parts. While waiting and with easy access I installed a pair of relays, one for accessories (triggered by the Front Accessories Plug) and one for aux driving lights that I plan to install at a later time. I removed the...
Back
Top