• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. DickB

    PedalBox and Pedal Commander - what do they do and how do they work?

    Let’s start with the basics. These devices plug in between the twist grip and the ECM. They alter the TAS. That’s all that they do, and that is all that they can do. They do not alter the ECM in any way. The ECM just sees a TAS; it doesn’t know if that signal is from the twist grip directly or...
  2. DickB

    PedalBox and Pedal Commander - what do they do and how do they work?

    That topic deserves its own thread.
  3. DickB

    '08 GS, Both turn signals doesn't work. Any ideas?

    Looking at the wiring diagram, if I am reading it correctly, the hazard switch and turn signal switch both feed into the cluster. However, the hazard switch is fed by 12v and the turn signal switch by ground. That is, the hazard lights are activated when the cluster sees 12 on the hazard pin...
  4. DickB

    PedalBox and Pedal Commander - what do they do and how do they work?

    I’ve seen a few posts mentioning PedalBox and Pedal Commander. I was curious about how these devices work and what they do, so I did some investigation and made some tests on my Ryker to find out. I found that while PedalBox and Pedal Commander increase (or decrease) twist grip sensitivity...
  5. DickB

    Zumo XT stopped working - anyone else had this problem? Will Garmin repair?

    I have a Zumo 396. The rubber over the power switch wore down and eventually fell off, so the unit was no longer waterproof. I called Garmin to ask about a replacement cover. I was told that they don't sell replacement parts, but Garmin sent me a whole replacement unit no charge (they even paid...
  6. DickB

    Has anybody heard any rumors on the 2025 Spyder Models? New line-up released!

    I was just at a Ft Myers dealer for a tire change. It had a 2023 F3 for less than $16K (not including dealer prep, shipping, tax, and license).
  7. DickB

    Anyone else have a battery that's losing charge? '23 RT Ltd

    My Ryker drew 60 microamps or .06 milliamps. Very low. https://www.youtube.com/watch?v=MBnbsrrwMkk
  8. DickB

    Looking at buying - If you are over 80 y/o and ride a Spyder, raise your hand...

    I have a 2014 RSS and it has the 998/Twin. I replaced over 20 parts rebuilding this project motorcycle and I had no trouble sourcing any of them, although some took a couple of weeks to arrive.
  9. DickB

    What do I do to read Ryker fault codes to see what's happening?

    The magneto is quite robust even at low RPMs. I get 14.6V at idle with accessories on.
  10. DickB

    What are you paying for insurance? Who are you insured with?

    I have Progressive in Florida. For my Can Am and Honda Super Cub $495 to $694 billed this month. Homeowners is worse - $2213 to $3984 in one year.
  11. DickB

    Anyone tried "Speed Bleeders" brake bleeders?

    Nothing got sucked back in. It operated as if the bleeder did have a check valve built in. Also note that the Service Manual instructions say nothing of opening and closing the bleeder or using a check valve. I have bled brakes before where the open/close or check valve was required, I have...
  12. DickB

    Anyone tried "Speed Bleeders" brake bleeders?

    Yes, I bled a couple ounces.
  13. DickB

    Anyone tried "Speed Bleeders" brake bleeders?

    But I did not open an close the bleeder, just left it open and it bled just fine.
  14. DickB

    Anyone tried "Speed Bleeders" brake bleeders?

    I had to replace the rear caliper on my 2014 RSS. This is the bleed procedure from the Service Manual which I followed. I did not use a speed bleeder or a check valve - it appears the caliper has this function. Am I missing something here?
  15. DickB

    What does your dealer charge for a rear tire replacement? This much??

    I took my rear wheel and tire in to Sun Sports in Ft Myers a few months ago. $35 to mount and balance.
  16. DickB

    Ryker turning left Issues

    The added parts are included in the 2022 parts charts, but the question is when exactly were the additional parts broken in to the assembly line?
  17. DickB

    What panels need removing to view Ryker Engine Number?

    You might have to remove the exhaust manifold heat shield.
  18. DickB

    Ryker's After Market Fuel Pump Works, but... Any ideas on this??

    Sounds like your float is sticking. You have to align the pump quite precisely to ensure that the float moves freely. (Ask me how I know.) The top of the capless filler on the 2019-2020 models was grounded using that black wire plugged into fuel pump ground. Later models added a cap and must be...
  19. DickB

    Want to increase Gas Tank capacity/Mileage Range - any suggestions?

    A little off topic, but there is a spec Miata racing class. A while back a guy was describing how he was cutting off the excess 1/8" or so on bolts throughout the car to reduce weight. The owner of Flyin' Miata, a tuner, responded "Just take a good dump before the race and save the time and effort".
  20. DickB

    Is there any Software that'll let me set US specs vs EU? (I'm in Sweden)

    Post a video of the problem. Sounds like you have a mechanical issue.
Back
Top