• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. jcthorne

    BEST Warranty - should this VCM/HCM module job be covered?

    The modules are covered if they fail. Yours sounds like it got dirt or debris in it which is not a failure, but a service/maintenance issue. Since all they did was clean it out and reset it, the warranty coverage leaves a good bit open to interpretation. I can also tell you they are much more...
  2. jcthorne

    Project RE-Key F3

    There are 2 ways to go about this. The BRP prescribed way is to replace the ignition switch which will come with 2 new keys that can then be programmed to the bike. I will warn you that this is a LOT of work as you will have to drill out the old lock then disassemble. The other way is to have...
  3. jcthorne

    New 2022 RTL Parking brake releases when parked! Ideas why?

    There is no 'holding brake' inside the motor. Its a simple worm gear drive motor. GM window motor to be exact. The worm gear is self locking. That is, no amount of torque on the pully will cause the worm gear to spin.
  4. jcthorne

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    When you pull the sprocket, you can see the face of the shaft seal. Its rubber faced. From the parts breakdown, the bearing is right behind that seal. The sprocket rides against the shoulder on the shaft, it does not touch the seal. Adding a collar will space the sprocket outward by the...
  5. jcthorne

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    I am not believing it either. The sprockets since 2019 are still having the issues. (White sprockets). Had a 2020 F3 in the shop recently covered in red dust. Not subject to the recall...but at least for that owner, still under warranty. Putting a washer behind the sprocket WILL NOT solve...
  6. jcthorne

    Need a new Rear tire - any suggestions?

    We have sold and installed a large number of Yokohama Advan Fleeva (and the S-Drive before that) to many happy customers. Its much better traction wet and dry than the OEM kenda and yet manages to average about 18k miles. Great tire from a top tier manufacture and MADE IN USA. Not the...
  7. jcthorne

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    So 6 weeks and counting since the cyber attack and they are STILL using it as an excuse to not conduct business or fulfill obligations. Nonsense.
  8. jcthorne

    What size are the oil Drain Plugs?

    No need to replace the plugs with hex. Use the correct tools to remove and they come right out. I have literally done several hundred oil changes on Spyders and not had trouble getting out a single plug that was not already mangled by using the wrong tools.
  9. jcthorne

    Front Pulley, Red Dust, and no outside flange! Are there 2 types of pulley?

    The side with the part number and MADE IN USA faces out. The other side has an X denoting wrong side.
  10. jcthorne

    2013 Spyder RSS Replacement Key Question

    This is an easy one to pin. If the key slides into the lock but will not turn, its the cut that is wrong and its the correct blank. Wrong blank will not slide in. Simple as that. Your locksmith cut the key wrong. Take it back, along with the bike and ask him to work on it to fit correctly...
  11. jcthorne

    What size are the oil Drain Plugs?

    Engine drain is T45 Torx, transmission/clutch drain is 6mm hex.
  12. jcthorne

    Has anyone got the permanent fix for their sprocket?

    I will make this easier for you. Your dealer is feeding you a bad line of BS in hopes you will just go away. Replacement sprocket for the permanent fix is not yet available and cannot be ordered. Your dealer can order and stock any parts they want to spend money on. The recall is to be...
  13. jcthorne

    Looking for new front tires - anyone tried 155/60/15?

    Yokohama AVID 175/55R15 And they will likely be the last set of fronts you will need on the bike..... Mine just clicked over 75,000 miles and still look good. Will get replaced at 8yrs but will not be worn out.
  14. jcthorne

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    Under FTC rules, if BRP officially updates the required maintenance schedule to add removal and lubrication of the sprocket, they would be on the hook for the cost of doing it. The maintenance schedule is part of the conditions of sale. BRP will not change the maintenance schedule for sold...
  15. jcthorne

    Are '21/'22 F3/F3-S's pre-wired for Fog lights?

    Yes. The lights and switch just plug in to the harness already in place.
  16. jcthorne

    DESS disable during our travels this year

    A number of folks have expressed desire to have DESS disabled but are not near a dealer or shop willing and capable of doing the task. As in years past, I will have my BUDS system with me during our annual bike trip and willing to meet up with other Spyder owners that wish to have this done...
  17. jcthorne

    Phone Call Issues on 2022 Spyder RT - any ideas?

    The basic problem is BRP Connect is broken. The Spyder infotainment system is defective and BRP refuses to give up and buy software from Google and Apple like every other OEM. The sooner you give up using it, the sooner you will dispense with the frustration from trying to use a defective...
  18. jcthorne

    Purchase red Master Key?

    Without a working key, the master key would do you no good anyway. Cannot program keys without a working one. The bike will have to have the ignition and DESS modules replaced which come with new working keys. Have it towed to a dealer that is willing to do the work as it requires BUDS to...
  19. jcthorne

    Doesn't DESS work well as a security device?

    Spyders get stolen. DESS has nothing to do with it. As a security system its next to worthless as it has a loop hole big enough to drive a city bus through. You do not need a valid key to disable DESS using BUDS. IE flat bed a Spyder to your shop. Disable DESS using readily available...
  20. jcthorne

    TricLed Sequential LED Turn Signals & Running Lights - Anyone else having issues??

    No. Turn signal wiring is just above on the mirror or signal. Brake would need to wire to the back and having STOP lights on the front fender would look kinda odd.
Back
Top