• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. bikerchris1270

    Drive Belt Vibration Dampener showing signs of Wear!

    Just showing the Drive Belt Vibration Dampener does indeed wear and should be checked regularly. 2 years, 11,000 miles Tapered wear even though it was parallel with belt. Top roller is the old one LaMonster Part.
  2. bikerchris1270

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    The Smoaks on You Tube just posted on the Front Drive Pulley https://www.youtube.com/watch?v=JzHOVtNTogQ
  3. bikerchris1270

    The Truth about LED bulbs - Don't Buy LED Bulbs Before Watching This!

    Led bulb for headlights Thank you…..very informative.👍
  4. bikerchris1270

    Customer service - what do you do when you can't contact a vendor?

    If paid by Credit Card, call the credit card company…. Explain situation…… they will contact vendor, no response, refund to you.
  5. bikerchris1270

    How many miles do you have on a recall pulley/sprocket?

    I replaced my front drive sprocket @ 6000miles when I saw the Red Dust appear.
  6. bikerchris1270

    What does the passenger seat sensor control

    Per shop manual description……..reduces maximum allowed lateral acceleration and yaw. (Throttle.Braking)
  7. bikerchris1270

    Starting issue - All of a sudden F3S not starting - Ideas?

    Pre Start relay contacts pitted located in Left Hand fuse box…….possible? Replace relay with known good one. .The starter button provides a ground circuit for the Pre Start relay.
  8. bikerchris1270

    Topping off your fuel tank - is it good practice??

    Is topping off your fuel tank a good practice? My research finds ,NO Raw fuel can be drawn into the evaporative emission system damaging the purge valve and canister. When fuel get hot it expands, engine off hot soak….. it’s going somewhere….. Let the discussion begin…..
  9. bikerchris1270

    Garmin XT update available

    Just noticed today, Garmin has what appears to be a relatively large map/software update available.
  10. bikerchris1270

    What’s your average MPG using what Octane Fuel?

    So far, it’s enlightening to read of the folks using a lower octane fuel, with no issues……
  11. bikerchris1270

    What’s your average MPG using what Octane Fuel?

    What’s your average MPG using what octane fuel, RT or F3,F3L? When I checked twice on a recent trip, With trailer and two up riding, I averaged 33.5 mpg with Monster Fuel Injection Stage 1 ECU upgrade using premium. So, the consensus average is about 35mpg.+- Kool, my mini van gets...
  12. bikerchris1270

    What's this shaft for on Left Side of my RTL under/behind front sprocket?

    Reverse shift shaft…..
  13. bikerchris1270

    Fitted a Train Horn from LaMonster!

    LaMonster is working on a solution for the RT.
  14. bikerchris1270

    Spyder surgery - one less thing to remove for servicing!

    Well, that’s one way of doing it…..
  15. bikerchris1270

    Fitted a Train Horn from LaMonster!

    Correct…. I moved mine back Due to Baker Leg Airwings….. I removed the $45 OEM Trim piece and used the top mounting hole to secure horn. Then I fabricated a trim piece to cover where the OEM cover was . I didn’t want to cut a $45 cover in case I want to revert back to stock. It’s loud! I think...
  16. bikerchris1270

    Fitted a Train Horn from LaMonster!

    No, plenty of room
  17. bikerchris1270

    Fitted a Train Horn from LaMonster!

    Note: I modified the instructions so as to keep the Baker Leg Air Wings. Thought a bit more about my install…. Top picture is my latest brain fart.
  18. bikerchris1270

    Anyone got torque specs for the Front sprocket?

    110 ft lbs with NEW Bolt. Kluber assembly paste is used on splines….acts as an insulator from metal to metal contact. Honda has a assembly paste which I used…..cheaper$. Amazon….search assembly paste…….Honda M77…..$20.
  19. bikerchris1270

    Radiator fans not coming on

    Defective fan relay is a possibility.
  20. bikerchris1270

    Stopped by to meet the man of LaMonsters Garage...

    Yes…..it’s loud!
Back
Top