• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. bikerchris1270

    Parking Brake won't release sometimes - motor or switch??

    There is /was a TSB service bulletin for intermittent Park Brake Operation on 2018/2019 F3 and RT. a new enhanced Park Brake Motor was released to replace to old number. Part #710007256. $209.
  2. bikerchris1270

    Had the sprocket recall done, now it's got a vibration! Which Belt Tensioner?

    Yeah,LaMonster did his homework…..it is the better choice.
  3. bikerchris1270

    Where do I Find the ABS Bleeder Valve on a '21 F3?

    The VCM activates the solenoids in the ABS for each circuit of the brake system(each wheel), so, just energizing the ABS Motor does not accomplish bleed of each wheel circuit properly.
  4. bikerchris1270

    Where do I Find the ABS Bleeder Valve on a '21 F3?

    I performed the brake bleed using BUDS interface last week on my F3L. During the bleed process, buds cycles the ABS pump while MANUALLY pumping the brake pedal. So, having said that……if one does NOT have BUDS, I think you can get away with bleeding the system……..accomplishing 90% flush...
  5. bikerchris1270

    Where do I Find the ABS Bleeder Valve on a '21 F3?

    Lift spyder off ground for access to left front plastic panel underneath spyder. Remove 3 plastic rivets and 1 torx head screw. Bleeder is on top of ABS unit
  6. bikerchris1270

    1330cc 2016 RT Ltd not running good - could it be the MAP sensor? Ideas?

    Maybe……check air filter box for mouse nest restriction. Or restriction in exhaust. Does it get to operating temp…198 degrees?
  7. bikerchris1270

    Defective lamonster belt tensioner?

    Call them…..LaMonster will make it right……..appears internal clip is missing.
  8. bikerchris1270

    Part stuck on Back order - any ideas on how to escalate?

    ***** Vehicle manufacturers are required to maintain a 10 years parts supply…….anything beyond that ,good luck.
  9. bikerchris1270

    Why you should flush your brake fluid properly

    I flushed the brake fluid on my 2019 F3L this afternoon using the BUDS interface……..I was surprised how much crap came out of ABS Pump bleed port……….the positive of bleed is the Brake Pedal is Firmer now.
  10. bikerchris1270

    Dot 3 vs Dot 4 brake fluid - DOT 4 absorbs moisture, so don't o/look maintenance!

    Your Spyder probably uses DOT 4 brake fluid with a maintenance schedule of every 2 years. Dot 4 has a tendency to absorb more moisture from the atmosphere than Dot 3 fluid, BUT Dot 4 has a higher boiling point with less seal swell than Dot 3. My Spyder only has 11k on it and I found the fluid...
  11. bikerchris1270

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    This guy is my hero.
  12. bikerchris1270

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    Is this the correct assembly sequence for the Recall Pulley? Concerning the Front Pulley Recall: Is the assembly sequence: washer, pulley, bolt; or, pulley, washer, bolt? I’m of the mindset to perform the recall myself in the future, not really a fan of letting someone else work on my vehicle...
  13. bikerchris1270

    Interesting news out of BRP on electrification.

    Maybe I could get one before I need an Electric Wheel Chair😜
  14. bikerchris1270

    Fix Odometer issue - zero-ed with flat battery!

    The TRIP ODOMETER I believe RESETS to 0 after 10K.
  15. bikerchris1270

    1330cc Is an ECU Modification permanent? Will BUDS overwrite it next service?

    I have a 2019 F3L which I performed the Monster Fuel Injection ECU upgrade. My choice was to buy the Genius Tool offered by MFI so as can can revert back to stock configuration at any time. Purchased Stage 1 Installation was easy following instructions. Results were ……in my opinion are worth it...
  16. bikerchris1270

    What oil are you using for your 1330 engine?? Tips & hints on oil change?

    Drink the Kool-Aid After reading all the opinions and my research, I’ll drink the Kool-Aid……..I will begin using Rotella 5w-40 in my Spyder 1330.
  17. bikerchris1270

    Need details/advice about F4 windshields?

    I believe the 25”. I’m 6’1” riding an Ultimate seat which sits up an 1”. Yes, I got the Goldwing vent!
  18. bikerchris1270

    Need details/advice about F4 windshields?

    I currently have the tinted F4. The tint does affect night vision slightly. I have installed Baker Wings on the Spyder to practically eliminate wind buffeting.
  19. bikerchris1270

    A small Safety Mod to our 2022 RTL with a big improvement!

    I received my button today……Forwarded to my Florida address.
  20. bikerchris1270

    Still waiting for a throttle body - 2012 RTL - Any other ideas?

    Life is short……Trade it in.
Back
Top