• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. ulflyer

    Batteries are Good ... Until They're Not

    I put a Might Max in mine back in late 2020 and its holding up fine for what I paid...$67. Looks like this one but did not buy from Ebay ...I think it was a Walmart vendor...
  2. ulflyer

    What brand of coolant/anti-freeze is BRP using?

    I have some Dex-Cool that was used in my GM motor in the Slingshot. It has an orange cap. Not at all sure this is appropriate for Can Am tho. Says its Phosphate & Silicate free, contents are Glycol......, Diethelene...... Going to draine and flush mine before winter and might just use...
  3. ulflyer

    First multi day trip with the wife riding her own spyder!

    A section of the BRP is closed heading West where it crosses Rt 421, just before you get to Boone. Not sure where you detour around to get on it, probably around Boone. RT 421 from Winston Salem to Boone is in good condition and generally not heavily trafficked.
  4. ulflyer

    What is the Secret to tightening the Axle Nut after Belt Adjustment?

    I have a clicker type torque wrench that goes up to 150 lbs, and a large socket that fit, and one for the left side to hold the axle while tightening. I can easily get the socket between the muffler and axle nut so thats not a problem and a section of pipe over the wrench handle to get the...
  5. ulflyer

    Help! Trying to get a working intercom/audio to our Helmets?! SOLVED!!!!!

    My riding buddy and I have the Sena 50S and when parked next to each other, or at gas stations, you can hear each other breathing (or grunting as the case may be while mounting) with exceptionally clear bluetooth. We've had them about a year now and they've never lost pairing (they did come...
  6. ulflyer

    Dealer claimed they couldn't release my Spyder if it failed the sprocket wear test!

    I'd tell them it is my bike, I'm taking home, and if they want a waiver of liability, lay it on the table.
  7. ulflyer

    Where to find exploded parts drawings? Installing rear wheel...

    https://www.canampartshouse.com/oemparts/l/cam/62a8d0a74f44ee6bd775b703/2016-f3-000e6g-parts
  8. ulflyer

    What is the Secret to tightening the Axle Nut after Belt Adjustment?

    Bruce, can't visualize how you drive a 2 x 4 between wheel and swingarm. Do you have it on a lift and the 2X4 goes in from the bottom? Something diff?
  9. ulflyer

    Looking for a good motorcycle-trike wheel-cleaner?

    Been using Simple Green for years. Rear wheel is much harder to clean and you're going to have to get on it with rag. The cleaner can only do so much.
  10. ulflyer

    What is the Secret to tightening the Axle Nut after Belt Adjustment?

    Many thanks for the feedback. I just came in from giving it another bit of torque and the Kriket reading was about 175 on the ground. If it holds at that, that is prob close enuf to suit. The reason I've been diddling so much with it is either loud whine and/or vibes at uncomfortable...
  11. ulflyer

    What is the Secret to tightening the Axle Nut after Belt Adjustment?

    I've done it so much I can just about tell by feel whether its within the Kriket range or not. I had about a 130 with wheel up. Will check to see what it reads after a final torque. BTW, I'm just across the Yadkin river about 5 mi up Rt 150.
  12. ulflyer

    What is the Secret to tightening the Axle Nut after Belt Adjustment?

    I get the belt loosened to where I want it, tighten the axle nut, and the belt tightens! Every time! Have gone thru this a half doz times now. I might have got it right today, purely by luck, as it rode well with no obvious vibrations, but I still need to torque the nut up more. Getting...
  13. ulflyer

    Part finder - Assistance required

    I found that getting the pin out was nearly impossible for me so I just use a nylon tie around the bar. The bars on mine are black so the tie is not obvious as it would be on your red ones but its something you can use in a pinch.
  14. ulflyer

    Getting back into another RT

    Good looking machine. Saw one just like it today at Honda Winston; customer brought it in service. Had mine in for belt adjustment/front sprocket check.
  15. ulflyer

    Anyone here run Elka or M2 shocks? Your take on them?

    If you are going to change the rear shock also, take a close look at the lower ends to see which brand has the stronger connection. Don't know about your model, but a '14, for example, has approx 5 inches between the two braces on the frame. To span this distance the '14 OEM shock has a...
  16. ulflyer

    2021 F3 Ltd - Looking for a 1" higher w/shield - what are you using?

    https://www.7jurock.com/products/can-am-spyder-f3-t-f3-limited-low-boy-replacement-windshield Do you have the short '12 shield? Thats what came on mine and I went thru a couple before settling on "16 for summer and a wider "17 winter. Not sure we have the same braces.
  17. ulflyer

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    What model? Perhaps you could post it under your signature.:D
  18. ulflyer

    The Truth about LED bulbs - Don't Buy LED Bulbs Before Watching This!

    Just replaced one in my F3 that seems to be same intensity as original OEM which is what I wanted: # 9003, $14 from Walmart.
  19. ulflyer

    Anyone removed their Engine covers (2021 RTL) & left it exposed? Any downsides?

    Me too. There might perhaps be a bit more heat down at the foot level, but I'm not aware of excessive heat higher up. Been on way home lately in couple of 90F days.
  20. ulflyer

    Is there a way to Lower OEM passenger foot pegs?

    Thanks Troop. Took them out just to see what was involved, with idea of making a footrest, but decided to just order a set from Lamonster and be done with it. Too hot out in shed to mess with it.
Back
Top