• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. SpyderJerry

    Need a muffler for an '08 GS - any suggestions? OEM or A/mkt

    Ebay shows a few. Also google it, you will find some used parts dealers.
  2. SpyderJerry

    2010 RT-S with front end wobble after brake change - can anyone help?

    You may have tightened the wheels unevenly. Loosen the lug nuts and retighten alternately a little at a time and then torque to 75 ft lbs. If it still persists you may have some debris behind a rotor that needs to be cleaned.
  3. SpyderJerry

    Loose steering - what needs to come off to access the upper joint?

    I have had that happen on my last 2013 RT and on the 2014 RT that I have now. Luckily on the 2014, it was the pinch bolt on the joint at the DPS that needed tightening. Could get to it with extension on the socket from both sides. The upper on the 2013 required removing the plastic for the upper...
  4. SpyderJerry

    What could this weird fender vibration when braking be?

    Ron, those were EBC MD853 rotors
  5. SpyderJerry

    What could this weird fender vibration when braking be?

    I just went through that on a 2014 RT SE6. I bought it with issues and the front right shaking when applying the brakes was one of them. Replace rotors and pads, had same problem, same wheel. Replaced A arm bushings, same problem. Long story short, I dial indicated the rotor and found .0012" run...
  6. SpyderJerry

    MORE BUGS - Cluster intermittently Resetting with Code P1697 - any ideas?

    could very well be a bad soldier joint at the board where the connector pins attach. I just did that on my 2014. you can unclip the lens and remove the board from the housing, look at joints where they meet the board with, if you tug on each pin gently with needle nose pliers, you may find the...
  7. SpyderJerry

    Any ideas where to get Touch up paint?

    I use scratches happen. They match very well. https://scratcheshappen.com/?utm_source=microsoft&utm_medium=cpc&utm_campaign=s-us--scratcheshappen&utm_term=scratches-happen&msclkid=0794bef6ecfd1e2aaf52dd6f055eb937 Make sure you order out of the US site
  8. SpyderJerry

    Info about Doc Humphrey's Air Ryde Rock Guard

    Unfortunately the #" is too tight and if you look at the bag fully inflated and under weight, it will be mushrooming out over a 3" cap. It may eventially wear through the bag where it contacts the top of the cap.
  9. SpyderJerry

    Info about Doc Humphrey's Air Ryde Rock Guard

    Just finished replacing air spring on my 2013 RT SE5. Used the rubber 4" end cap( wish there was a 3 !/2" would be perfect) Did the complete job with just removing both side panels and above plastic. Removed shock bolt, jacked up frame till wheel was off the floor, removed belt, level linkage...
  10. SpyderJerry

    Spyder pulling to left - Any ideas/suggestions?

    If the pull goes with the tire location, it is a tire problem. Possible broken ply in the tire. Replace tires.
  11. SpyderJerry

    Does the Steering rack have adjustments ~ 2015 RT ~ or some play in the Steering.

    I have just dealt with this a few weeks ago on my 2013 RT. Both the upper and lower pinch bolts needed to be tightened as it had a little slop on the splines. Of course, that meant pulling the upper dash and console assembly loose to get to the upper bolt. The lower bolt, I was able to get at...
  12. SpyderJerry

    Anyone got the part # for Antenna boot?

    RH Radio Antena Base 708300156 Plug number in google, you may find it from another source than dealer. $19.95
  13. SpyderJerry

    2012 Spyder RT With Sun Damaged Plastic/Trim - any fixes?

    Of all the different black plastic restorers I have used, this is the only one that worked and after a year still looks fantastic...
  14. SpyderJerry

    Where are all you Canadian Spyder Riders getting your Oil/transmission filters?

    Full kit number 219800263 for 2013 RT SE 5 On ebay for under $80
  15. SpyderJerry

    998 MPG average ?

    When my friend who has a 2005 1800 Goldwing trike and I ride together(mine is a 2013 RTSe5) we get about the same mpg. Any where from 30 to 34. Normaly driving 60 and below on secondary roads. Driving interstate it may drop to 28 mpg. Most trike conversions will drop mpg by adding weght and body...
  16. SpyderJerry

    Front sprocket blocked - how to remove?

    What ussualy happens is the pulley will have spline left on the inside of pulley that catches the spline on the shaft. I used a gear puller to get them off. You can possibley hold the shaft still and rotate the pulley to get the groove to line up.
  17. SpyderJerry

    Dash cam recommendations please

    I should clarify that I mounted the Dvr in the rear trunk. It comes with a wired remote controll that I mounted on the dash cover. The remote has a blue light that flashes to let you know it is recording. If solid blue it is not. You can also start or stop recording with it and take a still...
  18. SpyderJerry

    Dash cam recommendations please

    This is the unit I use and is waterproof. https://www.amazon.com/Blueskysea-A12-Motorcycle-Sportbike-Waterproof/dp/B08Q39RRYR/ref=sr_1_21?crid=1W5H640H86R36&keywords=motorcycle+dash+cam+front+and+rear+waterproof&qid=1638714823&sprefix=motorcycle+dash+cam+front+and+rear%2Caps%2C212&sr=8-21
  19. SpyderJerry

    Got a Spare key for early Spyders!

    Lockpicks has not had them available for about a year now.
  20. SpyderJerry

    Got a Spare key for early Spyders!

    Yes they as well as a locksmith can clone the key to start your bike.
Back
Top