• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. montago

    2014 RH Grill on 2013 RTS

    Today was 78F and almost no wind. I ran my bike for a good 150 miles and then brought it inside a friends back apartment fence so that it got no fresh air. Let it stand and idle for 20 minutes and it never even got above 5/8 on my temp guage. Warm air was blown out just fine by the fan and she...
  2. montago

    Pull Behind Trailers

    I have looked at the Uni-Go trailer also. My only issue with it was the fact it is designed to lean into a turn and drive the load down into the "standard" round motorcycle wheel/tire. With the Spyder it would seem to be side loading the connection joint and the wheel/tire. Since most of the...
  3. montago

    2014 RH Grill on 2013 RTS

    If temps do rise I plan to pull it off and use my oscolating saw to cut a couple of staight slots that I can heat up and bend into louvers. Whatever I end up will be better then a gaping whole. :D
  4. montago

    2014 RH Grill on 2013 RTS

    I trimmed away most of the extra flange around the lower hole cover so that there is plenty of airflow around the "plug". I've taped foil streamers to the leading edge of these gaping holes when I rode this fall and noticed a lot of air disturbance from the turbulence off the front wheel. I'm...
  5. montago

    2014 RH Grill on 2013 RTS

    My guess would be yes as the main body style is the same. Note: For anyone interested it only took me about 20 minutes to hand cut the plastic off with a coping saw and then sand the edges with my Dremal.
  6. montago

    2014 RH Grill on 2013 RTS

    Took a little trimming to remove the extended flanges used on the 2014, but fits really well and looks like it was factory installed. Check out the album link for pictures of the part and mods done to it before installing. http://www.spyderlovers.com/forums/album.php?albumid=3265 At $25 I...
  7. montago

    2014 RH Grill on 2013 RTS

    I'm planning to plastidip all of the fake chrome on my :spyder2:. Just need the temps to come back up so I can get it to stick.
  8. montago

    2014 RH Grill on 2013 RTS

    The showroom was a little dark, but with the side panel removed the grill was just slipped down from the top hole. As for airflow concerns I am going to keep an eye on it when installed and if needed I will make some holes in the lower solid plate to allow air out. I'm just happy to have...
  9. montago

    2014 RH Grill on 2013 RTS

    I was at my local dealer today and finally got to see a 2014 RTS sitting next to the match of my 2013 RTS. As I looked over the changes I noticed that the front trunk cowling was the only real differance as from there back it was the same as the 2013. Then I noticed that there is now a plastic...
Back
Top