• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. G

    Handling: 900 ACE versus Rally

    Really liked the look of the half fender. Guess I am just a little too picky about the dirt.
  2. G

    Handling: 900 ACE versus Rally

    You can replace the rear Rally fender with the full regular one. That is what I did after riding it for a short time and realized how much dirt and gravel was dropped on the swingarm and thrown into the shock area. It only cost about $70 or so and not too hard to do.
  3. G

    Ryker Rally vs 900 ACE

    Could it be that the Rally has a lower weight capacity because it comes stock with the max mount, hand guards, and upgraded suspension? Plus maybe the tires weigh more? Wondering once you add the accessories to the 900 you would end up with the same usable weight capacity.
  4. G

    Tools needed for Ryker wheel change

    Right hand thread.
  5. G

    Wires rubbing tire

    After reading a couple of comments about turn signal wire rubbing the tire and limp mode caused by a loose wire near the wheel I decided to look at my own. I found wires under the fender on the right side rubbing the tire. Fortunately the weather and roads have been too bad to ride in so I only...
  6. G

    Lamonster Floor Boards.

    No, but I do start there. You did ask an operational question that was clearly explained in the video.
  7. G

    Ryker limp mode info.

    Have a feeling it was not a loose wire but a wire that was rubbed by the tire. I think I read somewhere else on the forum about the tire rubbing the turn signal light wire. I looked up in me right fender and could see several wires against the tire. The left side was OK but close. Good thing...
  8. G

    Lamonster Floor Boards.

    The reason you were referred to the video is he explains your question in detail. Why would you prefer second hand information?
  9. G

    Ryker Windshield Bulletin

    Yes on the top two screws. I used 2 washers on one top screw and 1 washer on the other top screw. 1 washer on each screw may work but since I broke mine and glued it back together I did not want to put any stress on it.
  10. G

    Really good video of how to change your seat

    You can get a shop manual from your dealer. My dealer has one in for me just need to pick it up. The cost was $89.00.
  11. G

    Ryker Windshield Bulletin

    I found that problem out as well. I looked at mine and thought I should add some washers but then said maybe it will pull in. Well I broke off the tab on one side. If you take a small paint brush with some acetone and rub on the edges of both pieces until is softens a bit (you will see a...
  12. G

    Tools needed for Ryker wheel change

    I agree, it does not look exactly like a standard 12 sided socket to me either.
  13. G

    State Vehicle inspection sticker placement

    I think the shock is the only part that is not plastic and big enough for the sticker.
  14. G

    State Vehicle inspection sticker placement

    For those of you that are required to have an annual state vehicle inspection where have you been putting the sticker on the Ryker? I really hate to put a sticker on the plastic parts.
  15. G

    Picked up my Ryker Rally today!

    Case is a bit expensive but I am interested, especially the mounting system. Would allow me to possibly purchase a used case to save a little.
  16. G

    Picked up my Ryker Rally today!

    Added a picture to my first post. Put about 35 miles on it today. Had it up to 75mph or so a couple of times and did not notice any handling problems. I guess I was lucky and got one built on a good day. Wanted to do more but for some reason the Highway department decided to start spraying...
  17. G

    Picked up my Ryker Rally today!

    How did you mount the Givi to the Ryker?
  18. G

    Picked up my Ryker Rally today!

    Winnex3, Yes that is what I am thinking for the top case. What model is it and how did you mount it?
  19. G

    Ryker Issue Alert!

    I picked up my Ryker Rally today. They were checking fluids while I was dealing with paperwork. I asked them to be sure and check the gear box oil and they did need to add a little.
  20. G

    Picked up my Ryker Rally today!

    I picked up my Ryker Rally today. Went with the red panels although they look a little on the orange side but I like them. Also bought the windshield and installed my self. Did not get to take it for a ride as I have a messy gravel driveway. Just moving it from the trailer to the garage the...
Back
Top