• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. J

    VSS flashing on a wet road - normal ?

    I was out riding my F3S Daytona 2017. When I was turning right after a light, I turned slowly but when I was about to make the full turn, I did full throttle from gear two to gear three and all of a sudden this VSS light flashing for about 2 seconds and then went away. The bike swayed a little...
  2. J

    Lamonster Bright Ryder start cracking in the middle, anyway to fix?

    Already contacted to Lamonster Garage. They are sending me the replacement one. they said just very small chance that it could happen. But very nice of them, and definitely will buy more stuff with them.
  3. J

    Lamonster Bright Ryder start cracking in the middle, anyway to fix?

    My bright Ryder that purchased from Lamonster garage about 2 weeks ago start to get cracking right at the middle. My concern is when I wash my Spyder, is this gonna affect the light or even if it's rain? because now the plastic part that cover an actual LEDS are broke, now liquid can get right...
  4. J

    Suggestion: Swapping windshield for Daytona F3

    As much as I love an idea of take it off and put ut back in easy. Is the xcreen will fit on my little daytona windguard? I still try to find out which part of the bike that x-ceen will clip and hold on to? Do you have suggestion?
  5. J

    Suggestion: Swapping windshield for Daytona F3

    I have a 2017 Daytona F3 which comes with a black small OEM stock wind-guard. I'm looking to find a good windshield for highway riding (65-80mph). I am 5'6". What would be the best windshield that I could swap back and forth easily with my stock wind-guard? I still love the look of my OEM but...
  6. J

    Best Looking (cleanest) phone mount in my opinion

    just so I understand it correctly. You take those 2 red and black wire from MUYI 5kit tie it with the 3.0 car charger right, then you connect the other end of MUYI 5 kit with one of open harness at the trunk are? by the way what kind or size of drill bit that you use to enlarge hole?
  7. J

    Best Looking (cleanest) phone mount in my opinion

    Wow it looks really nicely done. I’m not the geek guy. By could you please directed me to where can I buy all that please? Thall those quick disconnect plug.
  8. J

    Best Looking (cleanest) phone mount in my opinion

    Did you have to drill to enlarge the hole? also it wire directly to the battery, and you capped the switched ?
  9. J

    Best Looking (cleanest) phone mount in my opinion

    where did you buy that USB port for charging your phone?
  10. J

    Installed Bajaron sway bar yesterday at the dealer. And this happened.

    It a whole lot better!
  11. J

    Installed Bajaron sway bar yesterday at the dealer. And this happened.

    Thanks man!
  12. J

    Installed Bajaron sway bar yesterday at the dealer. And this happened.

    I went out for a night ride and after coming back home, I ducked down and check the sway bar, I spot that the billet aluminium end link on both side was able to move left and right. As I'm new to the Can-am and Bajaron sway bar. I would like to get you guys opinion. Is the dealer installed them...
  13. J

    You! Your EXPERTISE IS REQUIRED...PLEASE! 2018 F3-S

    I'm looking for F4 windshield too, is it easy enough to swap back and forward from F4 to OEM stock? because I kind of like the design of my stock to run around town, but the benefit of F4 to take it on highway. thanks.
  14. J

    Brake linkage install problem.

    Lastnight , I tried to install my brake linkage, but ran into the problem on removing the 2 screws that located under the footpeg, it seems to be super tough to remove by saying that it's even tighter than the bolt that held the handlebar. Is there anything that I did wrong or is there any screw...
  15. J

    where would be the best place to get emblem decal to swap out my boring BRP logo?

    I really want to get Autobot from transformer logo to put instead of BRP logo but haven't had luck finding one yet. If anyone has any idea where should I go get it please let me know, the measurement has to be 68 MM,
  16. J

    Is removing front wheel can be done by yourself or dealer only? need to fix the rims.

    Have any of you guys in here ever remove the 2 front wheels out, if so what would be the proper tools to it? thank you.
  17. J

    Is anybody know how to access fault codes (engine light) on spyder f3 model?

    Thank you! what about how you reset it?
  18. J

    Is anybody know how to access fault codes (engine light) on spyder f3 model?

    Is anybody know how to pull up the fault code on Spyder F3? it seems that only RT could. I might be wrong. thanks
  19. J

    Owning my First Spyder F3, and drive experience.

    This is my first time owning a Canam F3 and I'm getting to drive it around. I noticed that when I'm trying to slow down from gear six, each time it goes to lower gear, I can feel almost like a soft choke from an engine to do so. I know that the bike itself is an automatic downshift, but it just...
  20. J

    How do you guys fix scratches on the daytona 500 high gloss black wheel?

    Thank you guys!
Back
Top