• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. NM Wrench

    Looking for Replacement Front Fender Lights for 2014 RT-S

    LED Looks like you have an updated fender. Those marker lights are LED's. Why are you looking to replace them?
  2. NM Wrench

    2010 rts electric windshield

    Pm noboot Sent from my VS990 using Tapatalk
  3. NM Wrench

    Want to put a compass on my RT

    Reply Hi this has been discussed here in the past. I am pretty sure that Finless tried it but found out that the magnets in the speakers messed with the compass. Unless you spend megabucks getting one that can be adjusted to compensate for that I would not recommend it. Good luck if you go that...
  4. NM Wrench

    Driver floorboards

    No. Base model has pegs Sent from my VS990 using Tapatalk
  5. NM Wrench

    Opening the front storage area

    Found it Hi I found the original box for the Kit. It is Part# 219400185. Here is the link:http://www.powersportswarehouse.com/pages/ECommerce/ViewCart?returnUrl=http%3A%2F%2Fwww.powersportswarehouse.com%2Fpages%2Foemparts%23%2Fs%2FBRP%2F%2F219400185. Also the correct color switch part number...
  6. NM Wrench

    Opening the front storage area

    I have one Hi Bob, I got the kit from powersports warehouse last year and you are correct the switch is blue. It is still available. I didn't like it and Paul Knudsen gave me the part number for the yellow one. I got with Whitt at PitBull and he had it now mine are all the same color! :yes:
  7. NM Wrench

    Opening the front storage area

    I did it Hi I have a 2014 RT-S. I installed the switch and actuator. I don't have the part number but will try and find it for you. It is a pretty straightforward job and doesn't take too long. I did have to get with Witt at pitbull and get the switch with the color that matches the 2014 as the...
  8. NM Wrench

    USB Power Charger replacement for analog gauge cluster

    JT on the vendor page has one Sent from my VS990 using Tapatalk
  9. NM Wrench

    12v Outlet Routing

    I removed the access panel for the overflow bottle. Right side mirror, upper panel and battery access panel. Not very difficult. Sent from my VS990 using Tapatalk
  10. NM Wrench

    12v Outlet Routing

    12 Volt I routed mine through the top opening for the windshield bracket. Zip tied it tightly to the top of the hole so there is no interference with the windshield. Then routed down through the body to the battery.
  11. NM Wrench

    RT front tire

    I have 155/55/15 on mine. Got them from discount tire. Do a Google search Sent from my VS990 using Tapatalk
  12. NM Wrench

    RT front tire

    I use federal evo Sent from my VS990 using Tapatalk
  13. NM Wrench

    Whooshing sound

    Sounds like brake pads. Entirely normal Sent from my VS990 using Tapatalk
  14. NM Wrench

    Stupid Questions

    Valve stem on the left side behind the belt sprocket. Yes you will get that screen if your truck is not latched tight. If you see the screen try lifting the trunk lid. I guarantee it will lift. Is your wiggle 2 up or 1? Try lowering the setting to 25% Sent from my VS990 using Tapatalk
  15. NM Wrench

    Replacing turn signal bulb - need help!

    Agreed but need to remove the fender also to access all of the tail light screws Sent from my VS990 using Tapatalk
  16. NM Wrench

    Red Rocks Spyder Rally riders Question

    We are leaving from Albuquerque early Monday morning headed north through Farmington and then West. Going straight through Sent from my VS990 using Tapatalk
  17. NM Wrench

    12v USB plug and ram mount in gauge spots. DIY Cheap.....

    How did you mount them? Sent from my VS990 using Tapatalk
  18. NM Wrench

    patch of hazing inside of h/l

    I have one also. Looks hazy on the right side left is ok Sent from my VS990 using Tapatalk
  19. NM Wrench

    Rear speakers

    If it's an RT-S it has rear speakers. You have to turn them up Sent from my VS990 using Tapatalk
  20. NM Wrench

    A question about the 2014 RT front fenders

    The 14RT-S has the new style fenders. The base has the old style Sent from my VS990 using Tapatalk
Back
Top