• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

2023 F3-T Limp home mode/check engine light- any ideas?

Pikester

Member
Hey everyone, I washed my Spyder this morning, no high pressure, was riding home, tried to set the cruise while going about 25 and the bike immediately went into limp mode and check engine light is flashing. I rode home with no issues, was installing a new horn, so the battery was disconnected for a couple of hours. Started the bike up, no check engine, started riding, went about a 1/4 mile and it went back into limp mode. I plan on setting up an appointment, but figured I would see if anyone had any suggestions. I have approximately 1700 miles. Thanks
 
Last edited:
Okay, so I checked my Pedal Commander and even though it is in the water resistant cover, there was quite a bit of moisture inside the cover. I disconnected the battery and the PC, hooked everything back up stock and everything is back to normal.
 
Okay, so I checked my Pedal Commander and even though it is in the water resistant cover, there was quite a bit of moisture inside the cover. I disconnected the battery and the PC, hooked everything back up stock and everything is back to normal.

Glad, you found the problem, and got it resolved quick.
Where did you have the PC mounted?
 
Back
Top