• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by SpyderSteveFL

  1. SpyderSteveFL

    TricLed Sequential LED Turn Signals & Running Lights - Anyone else having issues??

    I don't think this is true. I just got a set of the Show Chrome Slayer from Lamonster and it has the Show Chrome part number etched in the lens. I also have the Tricled HiViz mirror lights and they have Tricled etched in the lens. I was pretty sure Tricled either had their own manufacturing...
  2. SpyderSteveFL

    TricLed Sequential LED Turn Signals & Running Lights - Anyone else having issues??

    Yes. And I'm trying to determine if any improvements have been made or if people are still having failures?
  3. SpyderSteveFL

    TricLed Sequential LED Turn Signals & Running Lights - Anyone else having issues??

    Traded in our (aka wife's) 15 RTL for a 23 and it's time for all the mod fun to begin again. The 15 had the FenderZ from TricLED along will a lot of the a-arm lights and others of the 'smoked tube' flexible lights. The FenderZ were rock solid for 7 years, no issues but the tube lights failed a...
  4. SpyderSteveFL

    Anyone replaced the Purge (bleeder) valve on 2015+ RT?

    Has anyone replaced the purge valve on a 2015+ RT? Svc manual just says to pull off hoses and replace. The valve and hose are held in place with a plastic retainer and push-pin. Did you replace the valve with plastic holder in place or did you remove the line from the plastic holder? I released...
  5. SpyderSteveFL

    make it sound better

    No additional baffles, just removed the stock cat and replaced with the RLS. This model has a baffle built in. If anything I think it has more acceleration and low end.
  6. SpyderSteveFL

    make it sound better

    I put on the RLS cat delete about a month ago with stock muffler. I'm happy with it. It did change the exhaust tone and it's a little louder. I would do it again.
  7. SpyderSteveFL

    Best sounding muffler

    I wanted something a bit throatier but not obnoxiously loud. I wound up putting on just the RLS cat delete with stock muffler. The cat delete seemed to be of excellent quality, it does sound a bit better and is certainly not loud enough to worry about neighborhoods at nights, etc. Any maybe its...
  8. SpyderSteveFL

    Digital dash retrofit?

    No, sadly it can't be done. Want the digital dash, have to get an 18+.
  9. SpyderSteveFL

    Still waiting for a major change to the RT

    Yea, I've been following that since the initial concept release, I even asked some Honda reps at AIM shows and nothing... crickets. But reports in June said several of the components are in commercial production so we'll see. Yamaha will be first to market with the 2019 Niken but I think I would...
  10. SpyderSteveFL

    RT-622 Trailer Hub, Bearings, Races

    Yea, I think that curve is the key. Wish I would have known about that sooner, I would have tried something like that first. Paul has them in his very capable hands and I'm sure he has the right tools. Thanks!
  11. SpyderSteveFL

    RT-622 Trailer Hub, Bearings, Races

    I must have watched at least a dozen videos on this and most of them is as trikermutha says and you can get a chisel on the edge as indicated (most of these videos are boat trailer hubs including ones with brakes). The problem I had, and granted I am not a mechanic, is I could not get a tool on...
  12. SpyderSteveFL

    RT-622 Trailer Hub, Bearings, Races

    My first plan was to pound them out but I could not see any way to do so. The race seems like it is almost recessed in from the center of the hub, I could not seem to get on the edge of it through the hub even with a very thin edge. Seemed like maybe from the same side with a hammer puller but...
  13. SpyderSteveFL

    RT-622 Trailer Hub, Bearings, Races

    Yes, thank you so much for that amazingly generous offer. I will be in touch... Funny thing is there seem to be 2 brands of bearings in it - both L44649, on each wheel the outboard one has a black finish on the perimeter and says I think HCH while the inboard ones there is no black (more like a...
  14. SpyderSteveFL

    RT-622 Trailer Hub, Bearings, Races

    I got a 2011 RT-622 from 2nd owner with supposedly low mileage and installed ground kit, new harness and PM on the wheels. I read just about every post on here (and all over youtube) about bearings and races. One side looks fine but the second side looks like some water got in and is at least...
  15. SpyderSteveFL

    RT 622 trailer pack wheel bearings, who should service?

    Jack, I have read lots of posts on the trailer bearings and in each one you recommend against the bearing buddies but yet many others do recommend them. I've even seen posts supposedly proving grease does get to inner bearing. Do you know something or have some sort of proof that refutes the...
See more
Back
Top