• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by SpyderJerry

  1. SpyderJerry

    2014 RT right turn indicator on dash not working, but light is! Any ideas?

    I highly suggest that you add the led strips to the mirrors. I have done this on my last 2 spyders. Dash lights indicators are hard to see anyway in daylight. Here is a video of how it is done. https://www.youtube.com/watch?v=_kERPKY-M54
  2. SpyderJerry

    Got Limp & Codes U0073, U0122, U0100, C0060, P0556, P0504, U0101, U0128, U0295, U0303

    Check the pin soldier points on the gauge cluster board where the connector plugs in. Had the same problem on a 2014 RT that I bought. Cluster does come apart and you can re solder the pins to the board, carefully.
  3. SpyderJerry

    New main computer, odometer reset to Zero - any way to reset to show proper milage?

    At This point you need to contact BRP customer service. https://www.brp.com/en/resources/contact-us.html Make sure you document all the info on this problem to them. Or you can also call their customer service number that is listed.
  4. SpyderJerry

    998cc 2013 RT - Anyone know where to get a pump for Rear Suspension?

    google Viair 097c and you will find it for $110.00. You will need to rotate the compressor head 180 deg. It is stronger and more reliable than original. Also, when removing original compressor, take the end cap off - you may find that the crankshaft cam fell off the shaft inside the unit. You...
  5. SpyderJerry

    Error Codes P0222 & P2135 + Plug pics - corrosion?

    Do not put dielectric grease on terminals themselves. Dielectric grease is non conductive and will interfere with connection. You can use it aroung the seal of the connector.
  6. SpyderJerry

    2015 RTS SE6 Fast Crank, no start, no fuel - fuel blockage maybe? Any Help?

    If the engine is turning over with little resistance, you may want to take a compression test. Possible camshaft idler may have failed. Check out Y-der on youtube.
  7. SpyderJerry

    Need a muffler for an '08 GS - any suggestions? OEM or A/mkt

    Ebay shows a few. Also google it, you will find some used parts dealers.
  8. SpyderJerry

    2010 RT-S with front end wobble after brake change - can anyone help?

    You may have tightened the wheels unevenly. Loosen the lug nuts and retighten alternately a little at a time and then torque to 75 ft lbs. If it still persists you may have some debris behind a rotor that needs to be cleaned.
  9. SpyderJerry

    Loose steering - what needs to come off to access the upper joint?

    I have had that happen on my last 2013 RT and on the 2014 RT that I have now. Luckily on the 2014, it was the pinch bolt on the joint at the DPS that needed tightening. Could get to it with extension on the socket from both sides. The upper on the 2013 required removing the plastic for the upper...
  10. SpyderJerry

    What could this weird fender vibration when braking be?

    Ron, those were EBC MD853 rotors
  11. SpyderJerry

    What could this weird fender vibration when braking be?

    I just went through that on a 2014 RT SE6. I bought it with issues and the front right shaking when applying the brakes was one of them. Replace rotors and pads, had same problem, same wheel. Replaced A arm bushings, same problem. Long story short, I dial indicated the rotor and found .0012" run...
  12. SpyderJerry

    MORE BUGS - Cluster intermittently Resetting with Code P1697 - any ideas?

    could very well be a bad soldier joint at the board where the connector pins attach. I just did that on my 2014. you can unclip the lens and remove the board from the housing, look at joints where they meet the board with, if you tug on each pin gently with needle nose pliers, you may find the...
  13. SpyderJerry

    Any ideas where to get Touch up paint?

    I use scratches happen. They match very well. https://scratcheshappen.com/?utm_source=microsoft&utm_medium=cpc&utm_campaign=s-us--scratcheshappen&utm_term=scratches-happen&msclkid=0794bef6ecfd1e2aaf52dd6f055eb937 Make sure you order out of the US site
  14. SpyderJerry

    Info about Doc Humphrey's Air Ryde Rock Guard

    Unfortunately the #" is too tight and if you look at the bag fully inflated and under weight, it will be mushrooming out over a 3" cap. It may eventially wear through the bag where it contacts the top of the cap.
  15. SpyderJerry

    Info about Doc Humphrey's Air Ryde Rock Guard

    Just finished replacing air spring on my 2013 RT SE5. Used the rubber 4" end cap( wish there was a 3 !/2" would be perfect) Did the complete job with just removing both side panels and above plastic. Removed shock bolt, jacked up frame till wheel was off the floor, removed belt, level linkage...
See more
Back
Top