• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by SpyderF3-s

  1. SpyderF3-s

    Looking for price advice for selling 2015 Spyder F3-S SE6?

    I have a 2015 Spyder F3-S SE6 with just over 92,000 miles. I am looking to sell it (southern CA) and want to know what is a reasonable asking price. It has some modifications: - Harley custom fairing - Short reach handlebars - Harley foot rests
  2. SpyderF3-s

    Was this a Fuel Indicator Reserve Notification?

    Like I tell my wife and daughters - E means Empty, not Enough!
  3. SpyderF3-s

    Anyone had a Paddle switch failure?

    I have a 2015 F3-S that had the paddle shifter fail years ago. Luckily it was still under warranty at the time of failure.
  4. SpyderF3-s

    40K miles so far - how many miles will a 1330 engine RT last?

    I have a 2015 F3-S SE6 1330 with just over 92000 miles. Only problem I've had is the front sprocket.
  5. SpyderF3-s

    Can-Am parts webpage changed

    The link https://can-am.brp.com/spyder/shop/for-sale/parts-iframe.html no longer gets you to the Can-Am parts webpage. Anyone know the location?
  6. SpyderF3-s

    Front Pulley, Red Dust, and no outside flange! Are there 2 types of pulley?

    From the original picture shown, the sprocket was put on backwards. From information that I have, the part number should be on the outside. Plus the flanges are different thickness. The thickest goes on the outside.
  7. SpyderF3-s

    2015 F3 with metallic noise in front end - any ideas?

    That is the typical sound when the front sprocket is going out. Check for red dust.
  8. SpyderF3-s

    Out on a ride and lost power between engine and the belt

    100% guarantee it is the sprocket! I've heard that sound several time!! Most likely you have over 15,000. You can't order a replacement sprocket from BRP ( I tried so I could have a spare). Local dealer can't get the part either. He suggested to wait to see what the permanent fix is. There...
  9. SpyderF3-s

    Anyone received a Refund for Spyder F3 Sprockets purchased pre-recall?

    Same with me. Only will give you credit to use at a Can-Am dealer.
  10. SpyderF3-s

    Anyone received a Refund for Spyder F3 Sprockets purchased pre-recall?

    Has anyone received a refund for Spyder F3 sprockets that you purchased that is specified in the sprocket recall notice? I contacted BRP, got a case #, and they said to send them a copy of the purchases. I have emailed BRP ([email protected]) a copy of the purchases several times (since June 15)...
  11. SpyderF3-s

    Red Dust of Death Recall???? Front Sprocket Recall - FINALLY....

    I called BRP and my F3 was on the recall list. Luckily, I have receipts for the 3 sprockets that I personally bought and replaced (over 90,000 miles on F3). BRP rep opened a case for the cost, sent me an email with the required proof of purchase request. Sent them the 3 receipt copies. Lets...
  12. SpyderF3-s

    New White Pulley fitted on 2015 F3-S - already has red dust!

    This the lubricant that I used on the last two sprockets. I check to make sure bolt is tight every week. Shaft doesn’t seem to be worn much
  13. SpyderF3-s

    New White Pulley fitted on 2015 F3-S - already has red dust!

    New White Pulley fitted on 2015 F3-S Well the new white sprocket gave out this morning. No warning!! Luckly I had just got off Interstate for gas. Installed in June of 2020. Only 5000 miles! I think they are worse than the original. I'm going back to the old sprocket number.:cus:
  14. SpyderF3-s

    Bad key message...again!

    Found a solution to the BAD KEY issue on Youtube. Works great! Also be sure to clean the inside of the antenna. https://www.youtube.com/watch?v=QHqXa1_nU8g https://www.youtube.com/watch?v=woYHLg5k-mc
Back
Top