• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Rugame2c

  1. Rugame2c

    Fog lights won't work

    Just submitting a pic of all of my hard work!! :ohyea:
  2. Rugame2c

    Fog lights won't work

    Thanks for the info. :thumbup:
  3. Rugame2c

    Fog lights won't work

    Yes,.. Finally!! At least now I know more about the bike and taking it apart. I will most likely upgrade to HIDs soon. For now, are there any upgraded replacement bulbs that will give you better output than stock ones? I also installed the tricled light rings and difference of the two is very...
  4. Rugame2c

    Fog lights won't work

    YEESSS!!!!! They work!!!! :2thumbs: Thanks for all of your help!! :bowdown:
  5. Rugame2c

    Fog lights won't work

    So it looks like I did have the pins in wrong which is why I blew a fuse?? I'm off tomorrow so I will try the diagram in the morning. I hope it works!! Thanks again , will let you know results.
  6. Rugame2c

    Fog lights won't work

    Well,.. I found the connection on the left side of bike that fits the harness. I plugged into that, ran the switch wires through plug that fits other end of harness. Everything fit like it should but when trying to start bike the fuse blew to my display and no power to it. The bike still...
  7. Rugame2c

    Fog lights won't work

    **I will be taking the panels off today to check for connections that you suggested. I remember seeing a square connection with nothing plugged into it but nothing from the kit fit. I appreciate your help. Maybe I missed something somewhere.**
  8. Rugame2c

    Fog lights won't work

    That round piece is the LED fog light switch. The square connection next to it is what the four terminals go into. The other connection is much wider and looks like it is supposed to mount to frame of bike with the plastic piece to keep it in place. That is the one that I can't find a place to...
  9. Rugame2c

    Fog lights won't work

    I will check for that when I get off work today. Thanks Do you have a 13 model spyder with fogs?
  10. Rugame2c

    Fog lights won't work

    My problem is that there is nowhere to plug in the harness to get power to the switch or fog lights. My fogs are already connected. I need to get the harness hooked up. Maybe I have the wrong harness?
  11. Rugame2c

    Fog lights won't work

    The fog light set is for the 2013 RS and ST models.
  12. Rugame2c

    Fog lights won't work

    This is the harness I received when they were shipped to me by the previous owner. The two small connector pieces are the same ones that were already in place where I installed the fog lights. They connected right to them. The larger end is the one that has no where to plug into.
  13. Rugame2c

    Fog lights won't work

    Im not sure? The connections were sitting right next to where the fogs lights were installed. Fog light connections fit perfectly. Since my model is a 13 RS, I have been told that I don't need a new harness and some still say that I do? Replacements were needed only for the 08-12 models?? If...
  14. Rugame2c

    Fog lights won't work

    The only harness I received was the smaller one that hooks up the fog light switch with the relay attached. Where do I pick up power? I assumed that hooking up lights to the pre existing connections (already present) would be the power source? No instructions, I followed the Lamonster thread...
  15. Rugame2c

    Fog lights won't work

    I purchased a set of used BRP fog lights. It looks like I have all parts required. After mounting the fogs, I noticed that my bike has connecting plugs for the fog lights already in place so I hooked up fogs to them. My rs is a 2013, and looks different from the instructions I found on a thread...
See more
Back
Top