• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Roninassasin

  1. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Both oil filters have been replaced but I haven't checked the screen on the oil line
  2. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Yeah I was thinking that maybe if I replaced the o rings in the clutch cover it might raise pressure in system if they are bad or leaking.
  3. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Do you happen to have torque specs on bolts for procedure sorry I'm so needy 😂 thanks for all your help
  4. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    So would the clutch cover o rings and compression spring be my next best area to cover?
  5. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Some improvement. shifting is getting louder when shifting from neutral to 1st and I can shift out of reverse as long as I shift out of reverse while I'm going backwards under a little throttle. Even got it into 2nd once and shifted out of 2nd back down to 1st but seemed it was pure luck can't...
  6. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    New spring came in its at 115mm free standing?
  7. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Was thinking about using a spacer but not having a gauge to check what I had done could be mechanical suicide so I will wait.
  8. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    So I pulled the spring and its measuring 106.5 with no compression on it. Will probably pick one up tomorrow when I get off work just to get it back in spec. Going to order pressure gauge to check oil pressure. And I guess I need to break down and get the service manual. Thanks guys ill keep...
  9. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Do you have the measurements of what length the spring is supposed to be? Also I was able to take a 13mm wrench and get through the gears all the way up to 5 and down to 1 and neutral but it wasn't back to back shifting it took some rolling and moving the gear shifter lever a little back and...
  10. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Ok so heres the latest So I picked up part and inspected it and you was right it only resets under pressure and it ohm'd out correctly. Luckily the place was cool and didn't make me buy the part. So I put mine back together and I don't know if I just work on too much stuff and got lost on what...
  11. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Very valuable information thank you. I hope its this solenoid after looking into what I need to do to replace said orings😂... Went to American motorsports in Madison tn today they went over the solenoid with me and what my other problems might be as well.. Also showed me the service manual about...
  12. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    Yes thank you the ohm value has tested correct but I still believe the solenoid to be faulty. Going to order a new one and compare before installing maybe hopefully it will only cost me either the part of the restocking fee of the part😂 as to the previous question of how I got here. I am a fixer...
  13. R

    420256562 #32 hydraulic shifting solenoid valve specs?

    What is the ohm resistance supposed to be ? I read 3.0 on my dmm on other 3 solenoids and 1.7ohms on this solenoid also doesn't seem to return like it's supposed to when 12 volts is not applied it floats back and forth if it's pushed in it will come out on 12 volts but if it's out already...
See more
Back
Top