• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by RollonAA

  1. R

    Added risers, now bike will not start

    Try emailing this guy: [email protected] Very helpful and you can print if you use the adobe software.
  2. R

    Added risers, now bike will not start

    Hey Mate! Hey Pete! noticed your location, I worked with Aussies years ago (40 yrs ago). They were here working weapons separation from aircraft; great guys! Best to ya!
  3. R

    Added risers, now bike will not start

    JOb complete! Took me almost as long to put the tupperware back on as it took to repair the wiring!! I took the 1st piece, the long one from the front to under the tank, off many times trying to properly align it for the 2nd piece to fit correctly! Anyone know of a good video for putting...
  4. R

    What size are the oil Drain Plugs?

    I'd replaced them with hex head if i were you! I bought a used Spyder and the mechanic who did the 1st service messed up the torx drain ( I know because I have the service receipts from the previous owner!) Bike is a 2020 with 6300 miles.
  5. R

    Added risers, now bike will not start

    2 of the wires in the harness have been chewed apart by a rat, a big FAT RAT! 2 big rat traps baited and ready for the sucker tonight!!!! Fortunately, there's about 3 inches of wire left on the bottom of the ignition switch. The ground and hot line for the starter have about 3-4 inches...
  6. R

    Added risers, now bike will not start

    thanks much for your input, it is very well done!
  7. R

    Added risers, now bike will not start

    UtahPete, do you know where I can find the ground? I have a service manual and all those components have a common ground, but it doesn't say where it is located. Thanks
  8. R

    Added risers, now bike will not start

    Actually, I was in front of the bike and thinking left/right fuse box. I did check all the fuses related to engine, ECM and cluster on both sides. All of the fuses were good. Thanks for the input
  9. R

    Added risers, now bike will not start

    Thanks larryd. I didn't have to take any electrical connectors apart to install the riser.
  10. R

    Added risers, now bike will not start

    I did check the kill switch, in fact I tried it several times today. I think that the cluster should display even if the kill switch was bad, but don't know for sure
  11. R

    Added risers, now bike will not start

    Is there a ground associated with the riser? I noticed on the wiring diagram that all of the components that are NOT working are on the same ground wire! It's JT BK 5
  12. R

    Added risers, now bike will not start

    I have 3 keys for the bike and I tried each of them, no cluster lights and bike will not start. I didn't think the handlebars had anything to do with the problem, so I removed the RHS covers and the electrical connections all look good. I also turned the key on and loosened the handlebars...
  13. R

    Added risers, now bike will not start

    I just removed all the tupperware on the RHS and traced the wiring harnesses from the left and right sides of the handlebar down to the receptacle plugs on the left side of the engine. The receptacles are tightly joined and and the retainer tabs have not come undone.
  14. R

    Added risers, now bike will not start

    So right! Sorry about that, I was in a hurry to get to an appointment.....it's a 2020 Spyder RT Limited. I have checked all the fuzes in the right side box and the wiring connections on the right hand grip. Everything was good there.
  15. R

    Added risers, now bike will not start

    I added the taller risers and now I have no console display and the bike will not start. The lights come on and the horn works. Obviously the change caused the problem. Being new to the Spyder I'm not sure how to proceed to check out the problem. I removed the speaker covers and can see that...
See more
Back
Top