• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by redback

  1. R

    Coolant escaping from under the cap on the expansion tank, I need advice.

    I just fired it back up after checking the cap no apparent damage to the cap on a visual inspection and the spring appears to work. After putting it back on the hissing noise is gone, but after a few mins at temperature it started leaking from overpressure drain hole under the cap. Cap is...
  2. R

    Coolant escaping from under the cap on the expansion tank, I need advice.

    So i fired up the Ryker on the way back from work and noticed a strange low almost hissing noise. After a cautious ride home and removing the bonnet panel i immediately noticed Coolant leaking out from under the cap on the reservoir and down onto the kick plate. The coolant wasn't boiling off...
  3. R

    2020 Ryker Accessories

    Why doesn't can am refuse to offer a top case that fits a helmet? The stupid bag on the seat looks like trash and is unsecure.
  4. R

    For those of you who want to ride all year...

    Dude why did you spray paint your lawn?
  5. R

    Ryker 600 final drive leaking after 1300K's

    they replaced the final drive with a new unit.
  6. R

    RECALL - ALL 2019 and 2020 Ryker Models - Wheel Nuts

    Man there's no recall here in aus what should i do?
  7. R

    CVT Slipping?

    dude if your 100% sure its slipping with only 100 Miles on it take it straight back to the dealership, the belt in CVT hasn't bedded properly and needs to be adjusted.
  8. R

    Ryker 600 final drive leaking after 1300K's

    So i took my ryker into the dealership for its first inspection. In addition to the standard rust problem with the wields where the seat mounts (can am has sent a notice out to dealerships about it, apparently its not a big issue) I also had rust in the hubs of both front wheels, the shop...
See more
Back
Top