• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Rebob

  1. Rebob

    RT won't start or even turn over

    Sorry ya'll. It is a 12 RT Limited. I just now got it to start on my lunch break....once. After that it was totally dead, no light, radio, nothing. I don't know how it did it but it did. Guess I'll investigate a little more. Thanks
  2. Rebob

    RT won't start or even turn over

    Yesterday morning it started just fine. Got off of work and it was dead. Tried to jump it. I got power but when I tried to start it, it just clicked one time and was dead. Today I put a a battery charger on it. Went back a few hours later and no difference. I am leaving the charger on all night...
  3. Rebob

    Has anyone made their own driver floorboard?

    AWESOME! Thanks Mike
  4. Rebob

    Has anyone made their own driver floorboard?

    If the brake pedal tries to go below the floor board, can the brake pedal be adjusted. I would like to have my floorboards longer so I can stretch a little
  5. Rebob

    HowTo: check for leaks in the airbag system

    I took off the right side panels except I could not get the mirror off so that panel stayed on. I see where the line from the schrader valve goes to a component right below it and then the line goes from that component to the airbag. Do I just disconnect the lines from that component and hook...
  6. Rebob

    Has anyone made their own driver floorboard?

    Thanks for the info guys. I will have to look at Pierre's video
  7. Rebob

    Has anyone made their own driver floorboard?

    Last month my MC had a rally in Colorado. One of my brothers was looking at my Spyder and was talking about making floorboards. We talked about materials and just general stuff. The more I thought about it, the more I think I want to do it. If anyone has made their own, I could use some...
  8. Rebob

    What's with the whining noise mainly in 4th & 5th gears?

    I had to replace my belt tensioner and afterwards there was a high pitched whine. I only noticed it above 45mph. I found it is just the pulley on the tensioner. It was not a problem. After a while it calmed down and got quieter.
  9. Rebob

    HowTo: check for leaks in the airbag system

    At the same time I noticed the compressor not working I noticed when I adjust the rear shock I noticed that sometimes it would show Manual on the screen. Is there a connection? If not why am I getting the manual for the shock. Or, am I missing something?
  10. Rebob

    HowTo: check for leaks in the airbag system

    What was your compressor doing with the old valve?
  11. Rebob

    HowTo: check for leaks in the airbag system

    Went to Colorado in early June. I know noticed on the way back from Colorado that didn't hear the air compressor and I noticed my ride felt different. I can lose 50lb of air in 24 hours. Is there an easy way to check and see where the leak is? I know that the compressor is done from trying to...
  12. Rebob

    Parking Brake Fault

    Chris I replaced the Frunk/Parking Brake switch. Super Easy!! Then I got some contact cleaner and cleaned the pressure switch on the right side under the parking brake pulley. I had no luck so I investigated further. Apparently somewhere along the line of not being able to tell if I had the...
  13. Rebob

    Parking Brake Fault

    I am going to work on it today, Chris. I do believe it is on the back tire on the right side. You can't miss it. It is black and round. I am going to clean that entire assembly.
  14. Rebob

    Parking Brake Fault

    I have some contact cleaner. I can do that, thanks
  15. Rebob

    Parking Brake Fault

    Went to Colorado Springs and back with only a couple of times where it seemed that the parking brake did not catch. Today I replaced the Fronk/Parking Brake switch with no change. I checked the codes and it was clear. I will get some starter fluid and clean the rear assembly tomorrow. I will...
See more
Back
Top