• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by JohnMc

  1. J

    What do I have to do after battery is disconnected?

    It should go back to normal. No different than replacing battery.
  2. J

    cruise control on f3

    You will have to replace the entire switch. I tried taking one apart to just get the button and stuff. There does not appear to be a way without ruining the thing. You will have to take right side tupperware off, the tupperware around the switch, and rear of windshield attachment? Not sure...
  3. J

    Maintenance ramp suggestions

    I should have said to back it onto the ramps. That keeps them out of your way.
  4. J

    Maintenance ramp suggestions

    Drive it up on two car ramps and jack up the rear at the shock.
  5. J

    lamonster belt roller

    I have had the BRP arm with the Lamonster roller for a few months. No problems so far.
  6. J

    Help!!

    Do not delete cat if you want to keep low end torque.
  7. J

    Start up after storage

    I am not sure where I read it, but the ignition will not fire with the throttle at wide open. I verified this and have been using the technique in conjunction with oil changes. I do this because after a complete oil and filter change, my bike would clatter upon startup. This technique cured that.
  8. J

    2 new Model Exhaust will soon be available for the Ryker

    I like the Kaos version because the exhaust is further back and will reduce the sound for the rider and passenger.
  9. J

    Slingmods

    Great customer service and quality products.
  10. J

    Oil all over my engine

    I would not use an auto car wash spray on any areas under the plastic. It is not very hard to remove the plastic from that side to allow you to get in with rags and low pressure cleaner from a spray bottle. As a benefit, you can also check to see there is not a leak around the top of the oil...
  11. J

    No other bYke can do it... only TheBeast

    Great job!
  12. J

    Belt Replacement Help

    I would think you need to take the belt off the front pulley to give you slack.
  13. J

    Accessory input please..

    I upgraded and F3 to the 2 up shock. There is quite a difference in that shock versus the original. The 2 up is much more hardy. I am pleased with the result. I installed it myself and were it not for the removal of the fender liner, or whatever it is called that is below the seat frame and...
  14. J

    Mirror shell fell off

    I was in the same boat. I battled with that damn screw for several hours before giving up and strapping things in.
  15. J

    Adding Cruise to 2019 F3 base model

    I am going to add cc to my base model. I purchased a used control off ebay for a really good price. Now, I am wondering if I can just replace the dummy button from my current control with the button from the purchased unit. That seems easier than going into panels to find the connection point...
See more
Back
Top