• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by jcaburto

  1. jcaburto

    What part is this?

    So, after a nice clean up I narrowed the leak down to this one bolt on the front cylinder's valve cover. It's the one right next to the gas tank. I can see bubbles coming out of it. But it's not from the large valve cover gasket but in between the bolt's head and the black washer which I assume...
  2. jcaburto

    What part is this?

    Thank you again Peter!:2thumbs:
  3. jcaburto

    What part is this?

    Thanks It feels like oil to me
  4. jcaburto

    What part is this?

    Thanks, It is a V-Twin. The leak appears to be from that cover's gasket. So, right below the arrow, and it seems to be thick as oil. Knowing me... :banghead:yes, I might have overfilled it but the leak's been going on for a while now. It used to be a small drop every now and then. Recently I...
  5. jcaburto

    What part is this?

    Do you guys know what the part marked with the arrow is? Seen from the RH, right above the RH Upper Engine Support Bolt marked on the diagram. I seem to have a leak from there on my 2013 RTL. Thank you in advance!
  6. jcaburto

    ABS Fault Codes and Limp Home.

    Here I am during COVID-19 lockdown May 2, 2020 looking for ways to clear my codes and reading your post was even better than learning what those codes mean. :roflblack: thank you for the laugh!
  7. jcaburto

    What did you do to your Spyder today?

    The sled is ready! ;)
  8. jcaburto

    Spyder Backgrounds

  9. jcaburto

    Spyder Backgrounds

  10. jcaburto

    Oil leak

    I’ll give that a try. Tks!
  11. jcaburto

    Oil leak

    I’ve been meaning to do a follow up on this. The problem I think is the release valve on the jack. You can’t control the speed when lowering the load so if you let go off the pedal midway down the load will jerk up and down very badly adding a lot of stress to the frame. I have a jack from...
  12. jcaburto

    Oil leak

    So, since I had already purchased the gasket I decided to go a head and replace it. That seems to have stopped the leak. It did take a few hours but mostly because I did not have the right hex key to remove those 8 bolts. The only problem now is that my Harbor Freight lift broke when I was...
  13. jcaburto

    Spyder Backgrounds

  14. jcaburto

    Oil leak

    Not a stupid question really... I did not check for that. :opps: I’ll make sure to do it today.:thumbup: Thank you!
  15. jcaburto

    Spyder Backgrounds

    Sorry Jblk9695 and rbell0, I had to turn my dropbox sharing off when I noticed someone from China downloading and using my artwork to do shirts and posting on ebay. I completely forgot to remove it from my signature. I'll be happy to share any of them with you or anyone else who DM me...
See more
Back
Top