• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by GabrieleItalia

  1. GabrieleItalia

    Is this noise caused by a bearing?

    I changed the front sprocket. It seems that it was the cause of the annoying noise. It had play on the splines of the transmission shaft and in the front sprocket. I'll update more as soon as I have time to test it thoroughly, but I really think this was the problem!
  2. GabrieleItalia

    Is this noise caused by a bearing?

    Yes Mike, thank you. I still have both the lockite and the fat from the previous time. As soon as the spare parts arrive, I will update you!
  3. GabrieleItalia

    Is this noise caused by a bearing?

    Thank you. I'm ordering the parts. I'll keep you updated.
  4. GabrieleItalia

    Is this noise caused by a bearing?

    Hi Peter and thanks for your reply. I was just about to write an update of a further test I did. In fact, I lifted the Spyder on the hydraulic lift and checked it carefully and in fact in some movements by rotating the tire forward and sliding the belt it seems that the front pulley has played a...
  5. GabrieleItalia

    Is this noise caused by a bearing?

    Good morning guys, I did further testing this morning, and I always went to the top of the hill and then went down both with the engine in N and with the engine in first gear and the noise didn't go away. Then I tried to go downhill with the engine off and the noise continued to persist. After...
  6. GabrieleItalia

    Is this noise caused by a bearing?

    I will check the belt another time safecracker, just to be sure. No, I have always used the same MOTUL 7100 5w40 full synthetic oil. Now I'm waiting to have a little more time to be able to carry out some final tests, and then proceed, even if once the clutch has been opened, I will still have...
  7. GabrieleItalia

    Is this noise caused by a bearing?

    Thank edmat. The noise is continuous from when I let off the gas until the Spyder stops, and as soon as it stops this vibration stops. I'll explain - the bike starts regularly, in Neutral with no noise or vibration; and when moving in Neutral, rolling downhill, there's no noise, even when the...
  8. GabrieleItalia

    Is this noise caused by a bearing?

    Thank you woodaddict. I check the belt often, and it seems fine even now. I'll do your test anyway and let you know. I've changed the front pulley more than 20,000km ago and it has never given me any problems, even the tension and direction adjustments are fine.
  9. GabrieleItalia

    Is this noise caused by a bearing?

    Thank you all for the replies. It seems strange to me that it could be the front sprocket as this cyclical noise only appears when the throttle is released and ends as soon as you stop, even with the gear engaged. Also, because having put the bike at the top of a climb in N gear and then having...
  10. GabrieleItalia

    Is this noise caused by a bearing?

    Intersting. Could you write your experience? It could be useful to me before intervening unnecessarily by dismantling unnecessary parts. I’ve never changed the belt. It seems good.
  11. GabrieleItalia

    Is this noise caused by a bearing?

    Thank you very much for your valuable reply. Today I had a little more free time and did some tests. One of these was going to the top of a hill and going down in N gear and the bike didn't make any kind of noise. As soon as I restarted in first gear, the bike began to make that annoying noise...
  12. GabrieleItalia

    Is this noise caused by a bearing?

    Good morning guys, I need your advice and help. I am the owner of a 2018 Can Am Spyder F3s with SE gearbox with 54000km, which I have always carried out maintenance on. I have always used fully synthetic oil, I also recently changed the H CM filter and the oil. I also replaced the front pulley...
  13. GabrieleItalia

    Any more feedback on Kenda Kanines?

    Many thanks guys for your informations! This forum is gold! Anyway, the kenda tires we were talking about meet my expectations so i think i will continue to use them. I am happy to have discovered something more thanks to you.
  14. GabrieleItalia

    Any more feedback on Kenda Kanines?

    the stock tyres on the spyder have written “mc” on the side of the tyre, (the same is shown on the registration certificate) therefore specific for “special motorcycles purpose only”. if you can find tires with the same dimensions and the same initials “mc” (therefore specific for special...
  15. GabrieleItalia

    Fuel (GAS) price where you live

    Italy: 8.20 dollars/gallon today
See more
Back
Top