• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by flash2002

  1. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    There is a switch on the clutch lever but that's ok, the bike is in neutral. What I get is power on the plus side of the solenoid when start switch is pushed but no negative on the minus side.
  2. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    Mikey, the bike is a standard. Thanks, I wasn't sure about the lights. One more thing, is there a way to get a code even if the bike doesn't start?
  3. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    Sorry, it's a 2011 RT. It ran fine until I fixed the start switch, the switch does work (it clicks) but there's no head lights, and no start.
  4. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    I can't remember if the head lights come on with the key on, the rear lights come on but not the head lights. The problem is it won't start, everything is good - battery, connection, fuse, relay, solenoid. When I try to start the bike it just clicks (the relay) but the solenoid doesn't click...
  5. flash2002

    Any tips on the process of replacing the Old/malfunctioning ECM on a 2010 RS with a New ECM?

    How can I tell if a starting problem is caused by the ECM?
  6. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    Thanks for the diagram, you wouldn't happen to have the diagram from the front fuse box? I notice that the main relay doesn't go out when the bike is turned off. The relay stays on and get's hot until I pull it out, I don't think this is normal This is weird because the bike ran fine before.
  7. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    Ok, so I did some work this morning. I cleaned and checked the solenoid, and everything is good. When I push the starter button, I have power going to the solenoid, but not to ground. I did ground the solenoid on the frame, and the motor will turn over, but not start. The wire going to the...
  8. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    I did try that and nothing, the button only pushes on one pad. I think the second pad is just a bumper. I did check the solenoid and it's good; one thing I did notice is, there is no power to the wire going to the solenoid when I push the start button.
  9. flash2002

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    Hi guys, here is my problem. I have a 2011 Spyder RT that was giving me problems starting (intermittent). I noticed the start button wiggles in the hole. I took it apart and the whole switch box was loose, which I think was causing the problem. So I glued the switch in its place, put it all back...
  10. flash2002

    2011 Rear Wheel Static Balance - do it with hub & sprocket fitted, or without?

    Install Dyna-Beads then you're sure that it's balanced.
  11. flash2002

    Any ideas on a repair/fix for a Suspension Air Bag Leak?

    I had the same problem on my 2011, I just added some tire Slime to the bag no more leaks.
  12. flash2002

    Replacing windshield arm

    Yes I know, $250.00 Canadian :shocked:
  13. flash2002

    Replacing windshield arm

    I was riding today and all of a sudden, the windshield collapsed. When I got home, I notice the part that raised the windshield was broken in half. I looked on-line for the part but, they don't seem to sell this part. So I'm in the process to fixing this part, hope it works. I can't understand...
  14. flash2002

    How easy is it to replace Mode and Parking buttons? The print on 2019 RTL has gone!

    If you can find something like this might work...
  15. flash2002

    What are the Alignment Settings Specs?

    I did make a tool like in the video and it does work. I had trouble keeping the bike straight so, I tried his way and now I can let go of the bars and the bike stays straight.
See more
Back
Top