• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Fireball1800

  1. F

    RT622, Turn Signal bulb LED replacements?

    Ok, I've found that the bulb in question is a BAU15 based bulb P21W style with 30 deg off set pins on the PA6 base. Not a standard North America based bulb or base as it is made in Italy for the Canadian market. The standard 1156 base bulb is not for this socket as the holding pins are 30 deg...
  2. F

    My RT622 with Class 1 cooler basket on the rear of the trailer!

    Update.. Well I've completed my winter project... Mod's are: Rotopax mount on front, 1 gallon fuel, and 1 gallon water; Cooler rack with MooseJaw cooler on rear.
  3. F

    My RT622 with Class 1 cooler basket on the rear of the trailer!

    Thinking of fabricating a rear class 1 or 2, 1.25 hitch reciever to bolt on the rear of the RT622 trailer for temporary use of a small cooler. I carry a lot of camping gear when we go camping, so there is no issue with tongue wt. The cooler i have is a small 16qt cooler. (smaller thant the...
  4. F

    RT-622 Trailer with RotoPax fuel system

    nice, was thinking of doing the same thing. I was going to mount a cooler and these on each side of the cooler. Then I realized these two fit nicely inside the trailer at the back right behind the wheel well area. One on each side. between the cooler i had. But I was wanting to put a...
  5. F

    Is there a suitable substitute RT622 lid gas strut?

    The back lid gas struts have reduced their pressure to hold it up (drops about halfway). The gas strut part is SUSPA C16-27966. SUSPA doesn't give out specifications i.e. gas pressure or lift. These are $105.00 each (210.00 total) to replace from SUSPA. Anyone know of or used a suitable...
  6. F

    Are the RT622 capacity and weight limits conservative & can I stretch them a little?

    Are the RT622 capacity and weight limits conservative & can I stretch them a little? I have a RT622 and my wife and I are planning on doing a long-distance ride that will involve mostly camping. The trailer cargo capacity says 150 lbs. I find that little low considering the amount of space...
  7. F

    RT622 Lids and adjustment - any easy way to adj the front lid?

    Thanks, didn't think of that... :bowdown:
  8. F

    RT622 Lids and adjustment - any easy way to adj the front lid?

    Anyone know of an easy way to adjust the front lid on a rt622? Previous owner had the removed the lids to paint the trailer. sort of got them back on but huge gap was between front and rear lid. Attempted to adjust the front and got it almost perfect as far as the panels fitting the gap ...
  9. F

    Anyone upgraded to 5 bolt 4-1/2 pattern Hubs and 13" Wheels - RT622?

    ok, the update on this.. the e-trailer ST145/12 tire performed outstanding on a recent 1000 mile trip. Tire pressure reading on the tire was 65 psi max cold tire pressure, since the radial was different than the bias ply, I didn't want a stiff ride on the trailer, so I only used 60 psi cold...
  10. F

    RT622, Turn Signal bulb LED replacements?

    Anyone know of a good Yellow LED replacement for the 706W yellow bayonet single pole bulb?
  11. F

    Help For 622 TRAILER - amber light

    yep installed mine today. used step bit to make center hole larger. Used dremel tool to elongate the holes in then light assy from etrailer. makes trailer look better. like @fatboy..
  12. F

    Anyone upgraded to 5 bolt 4-1/2 pattern Hubs and 13" Wheels - RT622?

    Follow up. Well, don't.. The axle may work, the tire probably won't. I replaced my 4.80 x 12 tire with a ST145/R12 high speed radial from E-Trailer. Excellent tire, but here is what I had to do. The tire is a little wider than the 4.80 bias ply. After mounting, I noticed a flange on the...
  13. F

    Anyone upgraded to 5 bolt 4-1/2 pattern Hubs and 13" Wheels - RT622?

    specifically UltraTow #57225 high speed hub 5 bolt on 4.50 spacing with L44640 inner and outer bearings and comes with 1.25 and 1.50 seals. More options on wheels and tires over 4 bolt.
  14. F

    Anyone upgraded to 5 bolt 4-1/2 pattern Hubs and 13" Wheels - RT622?

    Anyone upgraded the hubs to a 5 bolt 4 1/2 bolt pattern and upgraded to a 13" wheels? Just wondering..
  15. F

    Trailer Tie Downs for securing load

    I was thinking about using something like this to the bottom mount bolts in my 622 trailer.
See more
Back
Top