• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by canamryder

  1. C

    Has anyone seen or have info on this electric Ryker shifter mod?

    I also moved the lever on the spline. Also while putting Ryker in reverse hook your heel over the Top of the lever.
  2. C

    A Little Bit of a Nuisance with the Ryker's Park Brake Lever, Fixed?

    I've been having the Parking Brake lever vibrate up, like in the 1st picture, a little annoying. I put a drop of JB Weld on the top and back side of the two worn tabs. I thought I had put too much on and would have to slightly file them down. No need, now the lever slight moves the two tabs in...
  3. C

    What Tools are needed for maintenance on a Ryker Rally?

    You'll need a torque wrench for the wheel nuts that are 221 lb/ft spec. (anyway on the 2019 models, maybe that has changed) Also a smaller torque wrench for other maintenance.
  4. C

    Ryker's After Market Fuel Pump Works, but... Any ideas on this??

    I never got the aftermarket pump to work 100%. I was able to clip into a ground wire without having to solder. The bar graph on console would never go up beyond 2/3 full. Even after trying to fine tune the float location. I rode it this way a couple times, but I knew something wasn't right. NEW...
  5. C

    Ryker's After Market Fuel Pump Works, but... Any ideas on this??

    The bar graph on the console only goes about 2/3 up when tank is full. The graph starts dropping down when fuel amount catches up with "range". Also, the black ( ground?) wire that is in the tank was not used on the pump. No where to plug it in. I zip tied it to the pump, so it won't be lost...
  6. C

    Is there a way to remove a Ryker's handlebar braket/lock screw?

    More Information on Steering Cluster Here's a blown-up view of a 2019 Ryker from https://www.canamseadooskidooparts.com/ Rykers are listed under Roadsters. You most likely will have to drill out #435 and 305. The steering column #120 does come out, but you may have to detach the cluster #130...
  7. C

    Need a new shed for my Ryker - any suggestions?

    That's what I did here in Illinois. I had a 10 x 12' (walls are 9?' tall) shed put in, with a 7' wide roll up door. Had a load of gravel laid down to level things up. The alley behind my lot came in handy. A 4' deep loft came with shed also. Any larger square foot shed I would have had to pour...
  8. C

    MY '21/'22 Production Ryker Fuel pump recall; + some '19-'24 replacements!

    This will stir you in the right direction. https://www.youtube.com/watch?v=CvJH0xSo0lc
  9. C

    My Ryker Rally Adventure Thread

    Are your grips level with your shoulders? You may want to try a set of handlebar risers first. Attaching them is quite easy. One drawback is you may have to slide the handlebars forward to fuel up though.
  10. C

    Discussing Throttle-by-wire, throttle response, and Pedal Commander 'improvements'

    I've been using Cinelli handlebar tape for quite awhile, for comfort. Never thought about the twist being quicker. I would assume you could control the diameter of the grip by how much you over lay each wrap. Many colors from Cinelli, but I used black to keep it cleaner looking. Start inward and...
  11. C

    Need help/advice on Reinstalling this side panel... Anyone?

    Maybe? put a little dab of Vasolene on those pegs also
  12. C

    Are there any a/mkt Drivers backrests that work on Rykers?

    Maybe this well help you out...> https://www.youtube.com/watch?v=iBchDlzjGGk
  13. C

    2 wheeler sayings don't apply to Rykers - we need 3 wheeler sayings!

    No comment, OH! my two friends wanted me to give a shout out..."HAPPY HALLOWEEN!"
  14. C

    After more info on Ryker Sound System - ideas, comments?

    I've been eyeballing the open ear style earphones. Don't know which brand would fit best under helmet and sound good also. I might wait until next year anyway. https://www.youtube.com/watch?v=BoJVJ7hUc58 https://www.youtube.com/watch?v=rxpsaJ2XdU0
  15. C

    '19 Ryker 600 Engine Light stays on - anyone else? Any ideas?

    Could be it's as simple as testing? and replacing the gauge cluster. Maybe that's where the problem is.
See more
Back
Top