• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Callahanjc

  1. C

    Front Spark Plug Removal on RT???

    front plug I had some luck by removing the top of the air box and went in front of the radiator on right side which gave me enough room to allow me to use socket 3/8 to1/4 reducer and 1/4 ratchet and 1/4 knuckle. i removed the shroud in front of the radiator except for like 1 bolt enough to...
  2. C

    Installing RT fog lights

    fog light I have a 2010 RT and last winter I installed these fog lights , they came complete with step by step instructions and was a nice project yo install. I found that any time you take your bike down .use something like ziplock baggies to put your bolts in labeling the area they came...
  3. C

    spark plug heat paste

    paste your right truth is they didn't have the silicone paste the day before at radioshack and i was wearied the stuff with silver could give me trouble on the next plug change . when i went back to the store the right stuff was hanging next to the other tubes so i bought a tube.
  4. C

    spark plug heat paste

    Heat sink paste I decided not to use the stuff with silver, and went back to RadioShack and found the Heat Sink Compound that Nancytoy was talking about and wiped it around the threads like she said, plug project HISTORY:gaah:
  5. C

    spark plug heat paste

    thermal compound this stuff is RadioShacks best thermal compound which has silver in it, But i think the standard thermal compound is probably better .
  6. C

    spark plug heat paste

    The question is how much of this heat sink paste should be put on the plug, A lot or A little, Q.#2 is it ok to use heat sink paste from radio shack that has the silver in it, for better contact on block of motor.
  7. C

    trailer wiring harness for 2010 RT

    trailer harness the dealer this morning said he would copy the installation papers for me:yes: will see, im going over later this afternoon to pick them up. Thanks for your input :clap:
  8. C

    trailer wiring harness for 2010 RT

    trailer harness
  9. C

    trailer wiring harness for 2010 RT

    I ordered the Can-Am trailer harness and in the process of installing it, it didn't come with any directions :yikes: I think I have the wiring plugged in wright , the harness behind the battery. but what do I do with the cable and plug end, does that mount on clutch side or brake side of...
  10. C

    trailer wiring harness for 2010 RT

    Is it safe to say that the only way your going to have lighting for your home made or aftermarket trailer is to use BRP parts, or is there a way towire the roadster with aftermarket wiring:yikes:
  11. C

    Fault codes C006C U0122 C0051 - Help!

    stranded next time limp mode comes on try revving up the throttle, that can also clear limp mode. this has happen to me, and the dealer was informed by BPR to take this action and it hasn't come back on for three weeks.:2thumbs:
See more
Back
Top