• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by AFace

  1. A

    How to open rear trunk, if won't unlatch with handle.

    The picture is great and it is not necessary to look up the opening to see. You can do it by feel and when the screwdriver stops move it to the right and you will feel it and hear the click. The tech actually showed me with just a screwdriver and not seeing anything. It's very simple...
  2. A

    How to open rear trunk, if won't unlatch with handle.

    Not quite the same... No panel has to be removed. If you read my post carefully you will see it says the handle, not the panel. It's much easier than what you explained. So you don't have to remove any panel at all.
  3. A

    How to open rear trunk, if won't unlatch with handle.

    So here is the solution... Took them all of about 30 seconds, if that, because the service tech knew what he was doing. (Done under warrantee.) Lift the LEFT saddle bag opener handle and hold it up. This exposes an opening which is behind that handle. Put a long screwdriver up that...
  4. A

    How to open rear trunk, if won't unlatch with handle.

    That's pretty much what they explained to me on the phone. I just don't want to take the chance and bend or break the panel and then have to replace that. Worth it to have them do it and maybe even have the cost covered under warrantee. Will let you know. Thanks for the advice.
  5. A

    How to open rear trunk, if won't unlatch with handle.

    Will do.... got rained out today. Will be going on Thursday and will post the outcome and how they did it.
  6. A

    How to open rear trunk, if won't unlatch with handle.

    I'm off to the dealer tomorrow... Hopefully they can get it open and make the necessary repair/adjustments. :bowdown:
  7. A

    How to open rear trunk, if won't unlatch with handle.

    Well tried that with no luck. Any other thoughts? :pray:
  8. A

    How to open rear trunk, if won't unlatch with handle.

    Does anyone know of any magic trick to open the rear trunk if it won't unlatch using the access handle? I feel some resistance but just won't release the latch. Appreciate any help or suggestions, short of getting a bigger hammer. 2013 RT-S :opps:
  9. A

    Recall Campaign Completed

    Had upgrade done last week and have enjoyed riding it in Florida hot weather. :clap::yes::bowdown:I am pleased to say that I was one of the first, if not the first, to have the recall upgrade done on my 2013 RT-S by Central Florida Powersports and am very happy with the mods. I have read all...
  10. A

    Recall work done

    Had the recall upgrade done last week and am enjoying riding in FL heat.... I am pleased to say that I was one of the first, if not the first, to have the recall upgrade done by Central Florida Powersports and am very happy with the mods. I have read all the posts for some time and have just...
  11. A

    2013 recall report after long ride 100deg ambient.

    Had upgrade done last week and have enjoyed riding it in Florida hot weather.... I am pleased to say that I was one of the first, if not the first, to have the recall upgrade done on my 2013 RT-S by Central Florida Powersports and am very happy with the mods. I have read all the posts for some...
  12. A

    F5 Fuse

    Had to same problem. At first shop thought it was the Bad Boy horn installed. But, after a lot of trial and error it turned out to be the compressor for the rear shock was drawing too much current. They had consulted BRP and there was nothing recorded as to what current it should be drawing...
  13. A

    Utopia Backrest

    Sheepskin source.. I ordered from sheepskinfactory.com and very pleased with them and the product. I included the information that I had installed the backrest and it came through with a 'cut out' and reinforced stitching so it wouldn't tare at the opening. We are both very pleased with the...
  14. A

    Utopia Backrest

    Utopia Backrest installed I installed the Utopia Backrest a few months ago and very happy I did. Took me a couple of hours but I read the instructions 3 times and cut and drilled once, sense you only get one shot at it. I received some pointers from them via email before ordering it and they...
  15. A

    How to install the kuryakyn ISO grips

    Installing grips with SE-5? I assume that there has to be a area ground out on the metal part of the grip that lines up with the paddle? Am I correct or is there any adjustment of the paddle to solve problem. Thanks for the video!!! P.S. I went back and found further instructions that...
See more
Back
Top