Compatability and fitment of a RT622 trailer on a 2016 RT

[cptjam]

The splitter that fits his bike is available separately. About $40. The module and wire that goes to the trailer can be reused.
Plugs right in. The module output wire goes to a connector under the saddlebag. I’ve done F3 to RT, RT to F3, old RT to new RT, and every combination. Works. Call if you have questions. Joe

[K80Shooter]

The splitter that fits his bike is available separately. About $40. The module and wire that goes to the trailer can be reused.
Plugs right in. The module output wire goes to a connector under the saddlebag. I’ve done F3 to RT, RT to F3, old RT to new RT, and every combination. Works. Call if you have questions. Joe

Could you supply a part number please?

[AY4B]

Could you supply a part number please?

Here is the link with prices. I ordered the one on the top row , left. for the 2010-2017 RT. It does not show one for the newer RT's

https://can-am-shop.brp.com/on-road/...cessories.html

[IdahoMtnSpyder]

Here is the link with prices. I ordered the one on the top row , left. for the 2010-2017 RT. It does not show one for the newer RT's

https://can-am-shop.brp.com/on-road/...cessories.html

The third one over, top row, lists RT-2018. The harnesses were discussed last year. I just reviewed some old threads, particularly these. https://www.spyderlovers.com/forums/...er+module+2018 & https://www.spyderlovers.com/forums/...er+module+2018 What you actually have is a 12 pin connector, not 6 pin, and your buyer has a 10 pin connector, not 5 pin. 2010 to 2017 RTs used the 10 pin connectors. 2016 & 2017 F3s used a 12 pin connector. Both RTs and F3s, 2018 on, use a 16 pin connector. You should be golden with the one you have on order.