Results 1 to 20 of 20

Hybrid View

  1. #1
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    9,738
    Spyder Garage
    0

    Default

    Gear Position Sensor, or maybe the clutch itself?!?

    Have you ever got any codes when it's misbehaving??
    2013 RT Ltd Pearl White

    Ryde More, Worry Less!

  2. #2
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,465
    Spyder Garage
    0

    Default

    Quote Originally Posted by Peter Aawen View Post
    Gear Position Sensor, or maybe the clutch itself?!?

    Have you ever got any codes when it's misbehaving??
    Peter does the MANUAL trans. have a Position Sensor ???? …. Mike

  3. #3
    Very Active Member
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    Quote Originally Posted by BLUEKNIGHT911 View Post
    Peter does the MANUAL trans. have a Position Sensor ???? …. Mike
    Yes it does. I think his issue is with the left hand controls, the actual reverse button. If it is a 10 it probably has 9 years of crud built up.
    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  4. #4
    Member
    Join Date
    May 2019
    Location
    Windsor
    Posts
    24
    Spyder Garage
    0

    Default

    I agree that the reverse push button needs to be removed and checked but The unit that houses it and other buttons will net come apart. I removed the screws but the haves will still not separate enough to get the push button out.

  5. #5
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    9,785
    Spyder Garage
    1

    Default

    Quote Originally Posted by tflatt View Post
    I agree that the reverse push button needs to be removed and checked but The unit that houses it and other buttons will net come apart. I removed the screws but the haves will still not separate enough to get the push button out.
    I was just looking at the parts diagrams. Man, you've got to get it apart! A new replacement switch module is not available! The two halves of the module have to come apart completely since that's how they're assembled in the first place.

    Have you done the test light procedure I mention above?

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •