-
Very Active Member
Any suggestions on where to tap the tail light wires on a 2020 RT?
I want to add an LED tail light cluster below my license plate and tap into the common harness somewhere behind the seat without pulling tupperware if possible.
Anyone know how to identify the bundle?
'20 Spyder RT: Bajaron swaybar. Vredestein tires, Pedal Commander, Elka front shocks, GPS/USB/12V handlebar mount, Heli-Bars, Radar Detector, KOTT grills & vents, Shad top case, chin & DRL LEDs.
-
Very Active Member
Look under the rear panel (it pops right off). There's a connection there for the light on the top box. You can get running and brake lights but no signal lights.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Active Member
My question is can we add lights and hence load to the circuit with this Canbus system? I would like to add a l.e.d. Flashing stop light but am afraid to do this.
Doug 2020 RTL F3 Short reach bars -factory backrest
K9CRT Ham Radio
Sold 5/27/2021 Spyder just wasn’t for me. Went back to Goldwing
-
Very Active Member
Yes, you can add LEDs IF they are designed to work with Canbus. The unit I have came off my last bike w/canbus.
'20 Spyder RT: Bajaron swaybar. Vredestein tires, Pedal Commander, Elka front shocks, GPS/USB/12V handlebar mount, Heli-Bars, Radar Detector, KOTT grills & vents, Shad top case, chin & DRL LEDs.
-
Very Active Member
Originally Posted by Doug44
My question is can we add lights and hence load to the circuit with this Canbus system? I would like to add a l.e.d. Flashing stop light but am afraid to do this.
The short answer is: Yes you can.
Call Spyderpops (a SL sponsor). He makes a quite a few LED light packages for your Spyder.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Very Active Member
-
SpyderLovers Sponsor
You can add a brake light by tapping into the 3rd brake light on the top box.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Thanks for the info on brake light products but as mentioned in OP, I want to re-use a $130 light assembly that does running, brake, and sequential signaling. I just need to locate which bundle to open to tap the wires. The signals are the key feature of the unit. The service manual lists the colors for each function but the bundle I opened under the rear seat has multiple same-color wires in it going to the rear.
'20 Spyder RT: Bajaron swaybar. Vredestein tires, Pedal Commander, Elka front shocks, GPS/USB/12V handlebar mount, Heli-Bars, Radar Detector, KOTT grills & vents, Shad top case, chin & DRL LEDs.
-
Very Active Member
Originally Posted by RayBJ
Thanks for the info on brake light products but as mentioned in OP, I want to re-use a $130 light assembly that does running, brake, and sequential signaling. I just need to locate which bundle to open to tap the wires. The signals are the key feature of the unit. The service manual lists the colors for each function but the bundle I opened under the rear seat has multiple same-color wires in it going to the rear.
It looks like you have a base RT without the top box. Assuming BRP uses the same wiring harness, there's power for run and brake lights (no signal lights) under the rear panel. It's easier to remove the rear panel if you first remove the passenger seat.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
Forum
RT Shop Talk
Any suggestions on where to tap the tail light wires on a 2020 RT?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|