Results 1 to 9 of 9
  1. #1
    Registered Users
    Join Date
    Mar 2011
    Location
    Statesville nc
    Posts
    67
    Spyder Garage
    0

    Default Changing oil 1330

    Has anyone posted doing the oil change on the 1330 motor. Mine is due and I want to make sure its done right.No service manual at this time. Any help would be great

  2. #2
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,542
    Spyder Garage
    0

    Default 1330 oil change

    Quote Originally Posted by BIKEMIKE View Post
    Has anyone posted doing the oil change on the 1330 motor. Mine is due and I want to make sure its done right.No service manual at this time. Any help would be great
    Yes I've seen Pics and Video's ......Mike ...............PS there are two plugs on the bottom , one is a 45 torx the other ( right side )( brake ) is a 6 mm hex..
    Last edited by BLUEKNIGHT911; 03-14-2015 at 12:23 PM.

  3. #3
    Very Active Member
    Join Date
    Jul 2014
    Location
    United States
    Posts
    2,655
    Spyder Garage
    0

    Default

    Mike, I should have done a video as I didn't remove as much as they said was necessary. I will the next time. Sorry. It wasn't that bad. Hardest part was getting the tupperwear off.

  4. #4
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,542
    Spyder Garage
    0

    Default OK

    Quote Originally Posted by Doc Humphreys View Post
    Mike, I should have done a video as I didn't remove as much as they said was necessary. I will the next time. Sorry. It wasn't that bad. Hardest part was getting the tupperwear off.
    Doc, I'm pretty sure it was " Texas " that did some excellent PICS , but I can't find ( or post ) the link ......Mike

  5. #5
    Registered Users
    Join Date
    Feb 2014
    Location
    Utica, Michigan
    Posts
    87
    Spyder Garage
    0

    Default I believe this is the Texas post Mike was referring to:

    Quote Originally Posted by BLUEKNIGHT911 View Post
    Doc, I'm pretty sure it was " Texas " that did some excellent PICS , but I can't find ( or post ) the link ......Mike
    http://www.spyderlovers.com/forums/s...ghlight=change

  6. #6
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,542
    Spyder Garage
    0

    Default YES

    Quote Originally Posted by Michiganspyderman View Post
    That's the one .....Thanks .....He doesn't show the plugs on the bottom but it's the filter that is tricky to find ........And I made a mis-take on the Torx......it's a 45 NOT a 40...........I corrected the post...............the 6 mm allen is correct.................Mike

  7. #7
    Registered Users
    Join Date
    Mar 2011
    Location
    Statesville nc
    Posts
    67
    Spyder Garage
    0

    Default

    Thanks all, Sorry it took me so long to get back. I ordered a manual on line and did the oil change on Saturday very easy once you have all the plastic off.
    The Craftsman ATV jack works good for lifting the Spyder to put on floor stands. Learning more about this machine everyday.

  8. #8
    Member
    Join Date
    Aug 2014
    Posts
    8
    Spyder Garage
    0

    Default matt

    On what site did you find the manual?

  9. #9
    Registered Users
    Join Date
    Mar 2011
    Location
    Statesville nc
    Posts
    67
    Spyder Garage
    0

    Default

    I found them on line at http://www.canammanuals.com/Can-Am%20Spyder.htm. Payed $28.00 but it was worth it. It covers the complete spyder. I down loaded it then saved it on a USB drive.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •