-
If I get my Spyder ready.
Mike
-
Sunday March 30
Originally Posted by Chaser666
Hey Tuck looks like we are gonna have a big group
will the restaurant be able to accommodate us?
Yes, I told them 15 to 20 and the gal said, ok, bring as many as you can find. I was on a ride down there on Jan 1 and half of the people living south of I20 must have been there.
Good question.
Tuck
-
Sunday
Originally Posted by MikeinGA
If I get my Spyder ready.
Mike
Hope to see you there
Tuck
-
Active Member
Thanks for the info Larry and Tuck.
Will be at the Chevro at 11 waiting for you.
Will see you then....⏰
-
Active Member
thanks for the info. See you guys at the chevron
-
Count us in! We will also meet at Chevron! Looking forward to it!
-
Very Active Member
Latest update on my Spyder is that BRP requested that the dealer send parts to them in Canada so they could inspect the parts. So, BRP has not said no to a warranty repair. The clutch basket parts have been ordered. They come from Canada.
it's looking that I won't have a Spyder to ride for a while? I asked about a loaner if my bike is not ready from SpyderFest. That 2014 RT Limited would be nice to ride, but I would have it for three weeks.
-
Sister in laws bypass pushed back to Friday so we will not be home in time for this ride. Catch you guys on the next one.
-
Sorry to her that. Gotta take care of the kin folks. Hopefully we'll do several rides and/ or meetings. Hope all goes well.
-
My wife and I can't make my Spyder is down. I have no front fender lights, no tail lights, no plate light, and no brake light. In the front fuse box the F7 fuse was burned out, I replaced the fuse and turned the key on and then it burned out the fuse again. Now I must find a place to fix it, I was going to Mountain Motor Sports - Conyers, but I read that Bloke and Darren (Certified Spyder Technician and worked on our Spyders) left I don't know where to take it to get it fixed.
Mike
-
Mitch is the head Spyder guy @ Freedom in Kennesaw. He is one sharp tech. Doing my 14,000 and 28,000 stuff as we speak. You could always drive
Down to Jackson, should be quite a few folks there.
-
Very Active Member
Josh is at MM @ Conyers now and he is a certified Spyder tech.
-
Very Active Member
Originally Posted by Hawk
Josh is at MM @ Conyers now and he is a certified Spyder tech.
Also, Robert Jenkins has replaced Matt at the service manager position and he is more Spyder savvy than Matt was.
Josh did some work on my RT last week and appears to know his stuff.
Penny and Rick have owned many motorcycles starting in 1974 with Hondas, then to Suzukis, Gold Wings and ultimately Spyders.
74 Honda 360T (pair); 78 Suzuki GS 1000 (pair); 82 Honda Aspencade; 84 Honda 400; 87 Yamaha 1100; 99 Honda Valkyrie; 01 Suzuki Burgman(triked); 02 Honda GL 1800(triked); 10 Spyder RTSE; 11 Spyder RTSM; 12 Spyder RTSL (pair); 20 Spyder RTL (current)
-
Originally Posted by TuckMiddle
Mitch is the head Spyder guy @ Freedom in Kennesaw. He is one sharp tech. Doing my 14,000 and 28,000 stuff as we speak. You could always drive
Down to Jackson, should be quite a few folks there.
I'll drive our Mustang down. So my wife and I will be there. See you Sunday.
Mike
-
-
Very Active Member
Did you try wiggling everything in the fuse box to make sure you have all good connections? Couldn't hurt?
I'll be arriving in my truck as I have no Spyder either. :-(
-
-
Originally Posted by Cavman
Did you try wiggling everything in the fuse box to make sure you have all good connections? Couldn't hurt?
I'll be arriving in my truck as I have no Spyder either. :-(
Yes I did that. It the F7 fuse that blew out. I'm in disconnecting all the lights I installed. I think it's in the switch where it's shorting to ground. Now I have to find another dealer to go to, I was getting my work done down at Mountain but now that Darren (the Spyder tech) has left I must find another good tech. See you on Sunday.
Mike
Forum
Georgia
The GA Spyders' Lunch Sundqay March 30 Seperate post so all see it, I hope.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|