-
03-06-2014, 05:41 PM
#251
...in the pink (Girls On Spyders)
yelp...had the service bulletin done...road about 400 miles last Saturday...ran real smooth....seemed cooler to the touch.....we will see...ever hopeful...I want this ST to run right...good...cool...
Originally Posted by Benggolf
Did you have your dealer perform Service Bulletin #2013-9 yet? If not, you should soonest possible as
I definitely noticed it ran a lot smoother and cooler after the service.
-
03-08-2014, 12:23 PM
#252
Originally Posted by Benggolf
Thought I share some pictures of the latest mod to our STS.
Thank you Carl for all your assistance and feedback.
Had Greater Vancouver Powersports do the install. Am happy with the end result.
Looks really sharp, I can't wait to do mine. I'm stopping by my dealers Monday (2 hours away) on my trip to Yuma. When they did my service a couple weeks ago they found the old screws the service called for replacing had fallen out, LOL but of course, along with my Belt Guard. I'm stopping by to have them install the new screws and belt guard and will stop by the Parts Department with the list of parts to get them priced in black. I have a white bike and, like Flamingo Babe, think it'll look great with the black panels. I'll let you know what they quote as far a cost ... my husband and I will be doing the install.
-
03-08-2014, 02:20 PM
#253
-
03-08-2014, 09:47 PM
#254
Originally Posted by JacqueTanis
Looks really sharp, I can't wait to do mine. I'm stopping by my dealers Monday (2 hours away) on my trip to Yuma. When they did my service a couple weeks ago they found the old screws the service called for replacing had fallen out, LOL but of course, along with my Belt Guard. I'm stopping by to have them install the new screws and belt guard and will stop by the Parts Department with the list of parts to get them priced in black. I have a white bike and, like Flamingo Babe, think it'll look great with the black panels. I'll let you know what they quote as far a cost ... my husband and I will be doing the install.
Thank you for the compliment. I took photos of a 2014 RSS at the Abbotsford Motorcycle Show. Here's what a back and white combo will look like.
photo 17.jpg
photo 15.jpgphoto 16.jpg
-
03-12-2014, 08:52 PM
#255
Active Member
Originally Posted by Benggolf
Here's the list of parts needed to do the 2014side panel conversion on the STS:
1. Circuit Yellow
Part # |
Price |
Description |
Qnty |
|
|
Panel Nut M5 X 0.8. Model-ST |
1 |
|
|
Torx Screw K40 X 12 |
4 |
|
|
Clip |
1 |
|
|
Can-Am Decal for Yello Model |
1 |
|
|
LH Upper Side Panel |
1 |
|
|
RH Upper Side Panel |
1 |
|
|
Circuit Yellow LH Front Pannel |
1 |
|
|
Circuit Yellow RH Front Pannel |
1 |
|
|
Circuit Yellow LH Upper Side Panel |
1 |
|
|
Circuit Yellow RH Upper Side Panel |
1 |
|
|
LH Upper Side Panel Foam |
1 |
|
|
RH Upper Side Panel Foam |
1 |
|
|
|
|
|
|
|
|
Should that first part number 250000069 be 250000079 instead or am I missing something?
-
03-12-2014, 08:58 PM
#256
Very Active Member
Originally Posted by golfsferr
I fired fired off an email, will call also.
thanks for the info.
What did they say?
-
03-12-2014, 09:41 PM
#257
Originally Posted by golfsferr
Should that first part number 250000069 be 250000079 instead or am I missing something?
Yes the correct part number is 250000079 and the price is only $2.97.
Carl
Last edited by quickster47; 03-13-2014 at 08:33 AM.
-
03-12-2014, 11:13 PM
#258
Missing "Can-Am" Decal
The dealer ordered the parts exactly as listed, but we received only 1 decal under704930141
|
$33.98
|
Can-Am Decal for Yello Model |
1 |
Am not sure if this part number consists of 2 decals which means BRP short shipped us or
you will have to order 2 decals of this part number instead.
What is your experience on this Carl?
-
03-13-2014, 06:45 AM
#259
Originally Posted by Benggolf
The dealer ordered the parts exactly as listed, but we received only 1 decal under 704930141
|
$33.98
|
Can-Am Decal for Yello Model |
1 |
Am not sure if this part number consists of 2 decals which means BRP short shipped us or
you will have to order 2 decals of this part number instead.
What is your experience on this Carl?
Opps, quantity should be two but the price shown is for two pieces. Sorry about that.
Carl
-
03-13-2014, 07:42 AM
#260
Very Active Member
Anyone get any kind of price break for making such a large order?
Wife told me I should do this, but just seems awfully expensive.
-
03-13-2014, 08:31 AM
#261
...in the pink (Girls On Spyders)
Originally Posted by quickster47
Yes the correct part number is 250000069 and the price is only $2.97.
Carl
I could not find 250000069...only 250000079...I'll look again...waiting to look...in person the Steel black color ...vs the white temps ...outside
-
03-13-2014, 08:35 AM
#262
Originally Posted by flamingobabe
I could not find 250000069...only 250000079...I'll look again...waiting to look...in person the Steel black color ...vs the white temps ...outside
Okay, made the same mistake twice. Correct part number is 250000079Duh!!!
Hard to believe that I looked it up twice, checked it three times and still made the same dumb typing mistake. Sorry!!!
Carl
-
03-13-2014, 04:04 PM
#263
Very Active Member
I never make mistakes.
-
03-16-2014, 09:07 AM
#264
Active Member
Originally Posted by SNOOPY
I never make mistakes.
And I'm right all the time............when my wife lets me be!
-
03-16-2014, 09:12 AM
#265
Active Member
I think I'm getting ready to pull the trigger on ordering. I found a good reasonable priced painter and a BRP rep is going to get back with me Monday. I know Carl hasn't had a hot day to test it yet but it's got to be an improvement!
-
03-26-2014, 05:59 PM
#266
Very Active Member
-
03-26-2014, 06:04 PM
#267
Very Active Member
Also, is this replacing screws we already have that the factory says replace every time you unscrew one?
I've taken my side panels off at least 10 times now w/ no problems and will probably take them off another 10, so don't want to spend $30 for nothing....
-
03-26-2014, 06:14 PM
#268
...in the pink (Girls On Spyders)
well I thought I wanted the 2014 new air-flow panels in Black Steel Metallic color on my Pearl White....but my wrap has a panel on each side that a solid black shiny color and I don't think the 2 different blacks will look good together, they will be right next to each other....so I think I'll go ahead and order the 2014 Pearl white and have Pete from Powersports wrap make me some new pink Can-am decals...thank you Carl for all your help
-
03-26-2014, 06:24 PM
#269
Very Active Member
If you're gonna wrap it anyhow should be good.
Are the parts in the list what you exactly ordered?
There have been some unanswered questions and no finalized list?
.
-
03-26-2014, 07:08 PM
#270
Originally Posted by SNOOPY
If you're gonna wrap it anyhow should be good.
Are the parts in the list what you exactly ordered?
There have been some unanswered questions and no finalized list?
.
Yes, the part numbers listed are correct and complete except for PN #704903141 Can Am Decal. You must order 2 pieces not one.
According also to Carl, the extended price of $33.98 is the total for 2 pieces.
Good luck!
-
03-26-2014, 07:20 PM
#271
Very Active Member
Originally Posted by Benggolf
Yes, the part numbers listed are correct and complete except for PN #704903141 Can Am Decal. You must order 2 pieces not one.
According also to Carl, the extended price of $33.98 is the total for 2 pieces.
Good luck!
Thank you Sir!
Forget the PM I responded to. LOL
I take it that the 069 part number should be 079 also?
And still not sure I need all the screws?
.
-
03-26-2014, 07:35 PM
#272
Originally Posted by SNOOPY
Thank you Sir!
Forget the PM I responded to. LOL
I take it that the 069 part number should be 079 also?
And still not sure I need all the screws?
.
I just ordered everything on the list to make sure the kit came complete (yet I still need a decal to complete the install). Surely you will want everything complete in one shot. No need to loose sleep over a few screws Snoopy.
Not sure about the part number on those screws but I seem to remember the mechanic and parts man talking about some screws. They just used my original ones.
Last edited by Benggolf; 03-26-2014 at 07:37 PM.
-
03-26-2014, 07:41 PM
#273
Very Active Member
Okay thanks.
May be doing this real soon since I found a bag of cash.
-
03-26-2014, 07:51 PM
#274
Originally Posted by SNOOPY
Okay thanks.
May be doing this real soon since I found a bag of cash.
Great! Keep us posted and good luck!
Have you gotten the dealer to do the Service Bulletin #2013-09 yet?
-
03-26-2014, 07:59 PM
#275
...in the pink (Girls On Spyders)
Snoopy...I ordered just what Carl said he ordered...except no decal...Pete at Powersports wrap will make my decal in pink.....and I ordered the panels in Pearl White
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|