|
-
 A couple of Spring Projects
Spent the afternoon working on the Spyder RT.
Took the mirrors off and disassembled them.
Wrapped the lower black plastic trim on the front of the mirror under the blinker in 3M Di-Noc Carbon Fiber. The scariest part was taking the mirrors apart. I watched a couple of YouTube videos and read a couple of post here and took a wack at it. Like everyone says it's a little scary at first but they do just pop apart if you press on the tabs just right.
Carbon Fiber Mirror.JPG
While I had them apart I went to Radio Shack and bought a couple of LED bulbs part # 267-0011 for $3 each and wired them into the lower inside corner of the mirror assembly so I could use them as a blinker indicator better. The arrow on the dash doesn't show up well in the bright sun.
Mirror LED Blinker.jpg
Just a couple of nice little touches, nothing special just making it mine.
Last edited by KAPike; 03-13-2014 at 02:34 PM.
-
-
 Originally Posted by KAPike
Spent the afternoon working on the Spyder RT.
Took the mirrors off and disassembled them.
Wrapped the lower black plastic trim on the front of the mirror under the blinker in 3M Di-Noc Carbon Fiber. The scariest part was taking the mirrors apart. I watched a couple of YouTube videos and read a couple of post here and took a wack at it. Like everyone says it's a little scary at first but they do just pop apart if you press on the tabs just right.
Carbon Fiber Mirror.JPG
While I had them apart I went to Radio Shack and bought a couple of LED bulbs part # 267-0011 for $3 each and wired them into the lower inside corner of the mirror assembly so I could use them as a blinker indicator better. The arrow on the dash doesn't show up well in the bright sun.
Mirror LED Blinker.jpg
Just a couple of nice little touches, nothing special just making it mine.
Nice job...love the CF look and the clean professional look of the single LED.
-
Very Active Member
-
Originally Posted by Some Guy
SPRING???!!! What part of Michigan has spring?! 
Seriously though...nice job. 
Exactly, where is spring? Like you I woke up to 6 inches of the wettest, heaviest snow we've had this season. That's why I said I spent the afternoon on this project. It took me until noon to dig out a path to the garage.
-
-
Originally Posted by Some Guy
SPRING???!!! What part of Michigan has spring?!
Seriously though...nice job.
-
I Like it !!
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Spring
That is so cool!
Dave 
-
Can you point me to the YouTube videos for disassembly? Thanks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
