-
Originally Posted by schnauzermom
So is the wrap clear so the color of the Spyder comes through or is the entire wrap already colored?
The entire wrap is printed with the graphics so everything is covered except the edges and seems. The hood (frunk) is a 4 piece set and the rear trunk is 5 pieces if this was one piece it would be very hard to install. The best way to install is to wet the surface and the back of the decal then apply and work the water out from under them to make them stick. This works good so you can get them into perfect alignment before they are stuck. Took me about 2 1/2 hours to do both pieces.
-
Very Active Member
I'd like to have a "clear" do-it-yourself wrap, don't trust these Clear Bra guys using razor blades around the paint.
-
You can buy that stuff in large sheets and cut it your self. I bought a set of 4 sheets (10x24) for my Goldwing. Look in the dirt bike area.
-
Originally Posted by SNOOPY
I'd like to have a "clear" do-it-yourself wrap, don't trust these Clear Bra guys using razor blades around the paint.
Professionals now use Knifeless Tape.
-
Very Active Member
Pretty cool, haven't seen that yet.
-
Originally Posted by Frank G
Professionals now use Knifeless Tape.
Not made for paint protectant ….. last credit in the video
-
Wow, that looks really, really nice! Maybe I'll have my Spyder wrapped. But I sure wouldn't do it myself. I can't even put a screen guard on a cell phone without wrinkles. Anybody know of anybody in Phoenix area that can install these wraps nicely?
-
spyder%204sale%20013.jpgspyder%204sale%20003.jpgLooking forward to seeing it all together. I purchased a wrap for mine and loved it. Here's a pic.
-
Very Active Member
-
yes
Originally Posted by SNOOPY
Nice
Did you do it yourself?
Yes I did. Took me about 6 hours and was quite pleased with it.
-
-
Very Active Member
Originally Posted by COOLMACHINE
Yes I did. Took me about 6 hours and was quite pleased with it.
Nice
-
Good Choice, 3 Wheel!
So after seeing 3 Wheel Addict's graphics, I had to have the same thing on mine. I didn't want a full wrap, just the hood and trunk, but after seeing the finished product, I kind of wish I bought a full set, as I liked it so much. It wasn't a "perfect" color match for the Quantum Blue Spyder, but close enough. Luckily I went with the version that had more black smoke around the borders of it, so this way the lighter blue's on the graphic don't stand out as much. If I had purchased a full wrap, I think it would have blended much better. But overall, still happy with it and would recommend it. The graphics were only $130. I purchased them from http://www.graphickitsdepot.com/
3-10-2014 8-05-49 PM.jpg2014-03-10 14.22.03.jpg2014-03-10 14.23.18.jpg
-
Very Active Member
Originally Posted by AZLife
So after seeing 3 Wheel Addict's graphics, I had to have the same thing on mine. I didn't want a full wrap, just the hood and trunk, but after seeing the finished product, I kind of wish I bought a full set, as I liked it so much. It wasn't a "perfect" color match for the Quantum Blue Spyder, but close enough. Luckily I went with the version that had more black smoke around the borders of it, so this way the lighter blue's on the graphic don't stand out as much. If I had purchased a full wrap, I think it would have blended much better. But overall, still happy with it and would recommend it. The graphics were only $130. I purchased them from http://www.graphickitsdepot.com/
3-10-2014 8-05-49 PM.jpg2014-03-10 14.22.03.jpg2014-03-10 14.23.18.jpg
I don't see that one on their website. Only 5 designs come up searching for Spyder.
Does anyone make one that fits the glove box? Are they very resistant to scuffing? I'm thinking I'd like to put something on my glove box lid to protect it from my boots when I get on and off.
-
Originally Posted by WasWinger
I don't see that one on their website. Only 5 designs come up searching for Spyder.
Does anyone make one that fits the glove box? Are they very resistant to scuffing? I'm thinking I'd like to put something on my glove box lid to protect it from my boots when I get on and off.
I haven't seen any that fit the glove box. I was told that the kits are 21-23mil thick industrial grade triple-layer 3M adhesive. They are covered with a thick layer of scratch-proof crystal clear vinyl over laminate.
Here's a link...lots of colors and designs for Spyder. You can ask for custom versions that have more black and smoke around the edges.
http://www.graphickitsdepot.com/cata...s-kit-301.html
-
Very Active Member
Originally Posted by AZLife
Thanks.
Those guys have got one screwed up website. There is no way to get to that page from the Home page that I could find. Every link that says Can An Spyder ends up on a page with only five choices.
-
Originally Posted by WasWinger
Thanks.
Those guys have got one screwed up website. There is no way to get to that page from the Home page that I could find. Every link that says Can An Spyder ends up on a page with only five choices.
I dealt with them directly via email and they got me exactly what I was looking for. I just clicked the the "Contact Us" link and sent them an email. I received a reply fairly quickly. Good Luck. It's a great graphic.
-
Originally Posted by WasWinger
Thanks.
Those guys have got one screwed up website. There is no way to get to that page from the Home page that I could find. Every link that says Can An Spyder ends up on a page with only five choices.
I understand what you are saying now. Each one of those 5 choices are for a different type of kit (# of peices & Spyder Model). When you click on one of the kits you will see a dropdown list for Design color and background color. And if you scroll down the page, you will see a ton of different designs. My design in the pics was Cold Fusion. There is even a coupon code at the top for 10% off. I just got mine installed today (paid a local place $100 for professional installation, but after seeing it installed, I kind of think I could have done it myself. The installer told me all the separate pre-cut pieces make it a lot easier than one large wrap. Maybe 3 Wheel Addict (the original poster of this thread) can jump back in and tell us what he thinks of his since he's had them for a while now. I'd be curious myself.
-
-
I bought a set for my Mag silver
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
-
-
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|