-
-
If the only tool you have is a hammer...
-
-
Very Active Member
-
-
Very Active Member
![](signaturepics/sigpic7177_92.gif) it was fun while it lasted. ![biker](images/smilies/doorag.gif)
-
On my 2011 RS-S it is on the RH grip in front of the grip. The manual says you can use it to turn on the headlights without starting the Spyder. It says it will reflect into the frunk to help find stuff, though it seems less than optimal for that purpose because you have to hold it on.
-
Very Active Member
![](signaturepics/sigpic7798_4.gif)
2018 F3 LIMITED
-
Very Active Member
FRUNK
![Quote](images/misc/quote_icon.png) Originally Posted by OJ UK
The rear switch button on the right side handlebar cluster flashes the head light when the bike is switched off.
Is it supposed to do anything when the bike is running? If not, then what is it's intended purpose? ![don't know](images/smilies/shrug.gif)
that button is so you can lite-up the FRUNK at nite.... open the frunk, n press that button... you'll see that the lite reflects off the inside of the frunk hood into the frunk....
gr8 idea if u ax me....
-
MOgang Member
![Quote](images/misc/quote_icon.png) Originally Posted by OJ UK
The rear switch button on the right side handlebar cluster flashes the head light when the bike is switched off.
Is it supposed to do anything when the bike is running? If not, then what is it's intended purpose? ![don't know](images/smilies/shrug.gif)
I thought it was for signaling other drivers. Like flashing your lights twice to say "It's ok to merge in front of me" or flashing your lights to say "There's a speed trap ahead."
Joy
Very Happy Ryder... '09 Phantom and a '15 F3-S
If you don't slow down, they can't catch you..
If you don't give up, they can't win.
What a long strange journey its been.
-
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
-
-
-
Very Active Member
![Quote](images/misc/quote_icon.png) Originally Posted by Bob Denman
Ooh! ![shocked](images/smilies/shocked.gif)
That makes PERFECT sense!
Think how much safer the bike will be with all of that unnecessary weight removed from the cylinder walls..
It'll handle MUCH better!!
(Chevrolet engineers actually tried to use this argument to upper management, when they bored out the 390 to a 427... They didn't buy it! ![Big Grin](images/smilies/biggrin.png) 0
Bob,
Are you sure that wasn't the 396? I know there was a Ford 390.
http://www.popularhotrodding.com/fea...chevy_history/
Okay, back on track.
Last edited by wyliec; 02-05-2014 at 12:20 PM.
-
-
Very Active Member
![](http://smileys.smileycentral.com/cat/14/14_6_16.gif)
![](http://smileys.smileycentral.com/cat/14/14_6_18.gif)
![](http://smileys.smileycentral.com/cat/14/14_6_12.gif)
![](http://smileys.smileycentral.com/cat/14/14_6_13.gif)
RTS 1330 Raw Power, yeah we bad .. ![biker](images/smilies/doorag.gif) ![biker](images/smilies/doorag.gif)
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
The 1503 is a totally different motor than the 1330. The 1503 has been around since late 2002 and NA makes anywhere from 130-155hp depending on platform. Supercharged versions make up to 260hp stock and guys in the know, push them easily well over 300hp very reliably. It's an extremely well built motor that responds nicely to mods.
While it would be nice, I highly doubt your going to see the 1503 in the spyder.
-
-
SpyderLovers Sponsor
That button ...
If it is the one I think you are asking about... I have one on mine and was told
that it is there so at night when you have the trunk lid up and push the button it
lights up the inside of the trunk... or bonnet if you will... is that the one?
Dave
![Quote](images/misc/quote_icon.png) Originally Posted by OJ UK
The rear switch button on the right side handlebar cluster flashes the head light when the bike is switched off.
Is it supposed to do anything when the bike is running? If not, then what is it's intended purpose? ![don't know](images/smilies/shrug.gif)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|