Results 1 to 4 of 4

Thread: Exhaust smell

  1. #1
    Registered Users
    Join Date
    Apr 2012
    Location
    Phoenix
    Posts
    166
    Spyder Garage
    0

    Default Exhaust smell

    Folk,

    i have a 2011 RS with a hindle exhaust, I'm on a AZ to Oregon ride and getting alot of exhaust fume smells. I had the Y gasket replaced during scheduled PM a while back. I now have 18k miles on the bike. Also when going hard on the acceleration or downshift hard at high speed getting popping from the exhaust. didnt have running lean in AZ. Don't know if the two are related- any ideas?

  2. #2
    Registered Users twain's Avatar
    Join Date
    May 2011
    Location
    Rosharon Texas
    Posts
    529
    Spyder Garage
    0

    Default

    Did you replace gasket with BRP or Honda? My BRP did not last long so switched to Honda gasket. I too ad lots of popping when downshifting or slowing down. Also had dual two brothers exhaust. Are you getting lot of heat off right side by leg?

  3. #3
    Spyderless Member
    Join Date
    Dec 2008
    Location
    north/central n.j.
    Posts
    6,432
    Spyder Garage
    0

    Default

    Quote Originally Posted by blambert View Post
    Folk,

    i have a 2011 RS with a hindle exhaust, I'm on a AZ to Oregon ride and getting alot of exhaust fume smells. I had the Y gasket replaced during scheduled PM a while back. I now have 18k miles on the bike. Also when going hard on the acceleration or downshift hard at high speed getting popping from the exhaust. didnt have running lean in AZ. Don't know if the two are related- any ideas?
    How many miles on the gaskets?? If you used the BRP gaskets and have more than 6k or so on them, could be that their worn out. ...Honda gasket# 18392-MAM-000, You'll need two...

  4. #4
    Registered Users
    Join Date
    Apr 2012
    Location
    Phoenix
    Posts
    166
    Spyder Garage
    0

    Default

    Since poweride did the replacement I assume it was a BRP gasket. And you also getting the exhaust smell from the blown gasket?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •