-
vented windshield
Are there any after market vented windshields out there for the RTs? Thanks.
-
-
F4 Customs was in the process of making one when I contacted them a few months ago.
-
Any reason why you're not looking at BRP's offerings?
Or are you?
-
Very Active Member
Rewaco RF-1 GT
Inline 4 cylinder Ford Zetec with multi-port fuel inject, 140 HP
0-60mph: 5.8 seconds
5 speed sync manual with reverse, mechanical dry clutch.
Front suspension: Trapezoidal fork with center spring
Rear suspension: Independent with Bilstein gas shock absorbers
Brake System: Grimeca calipers, linked ventilated discs, with booster
10.57 gallons
-
BRP 25" adjustable vent windshield.
windshield2.jpgwindshield4.jpg
-
Originally Posted by stevedfive
Also available in 23"
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
BRP vented windshield is comes in 23" to 25". It can be open or closed at any time. Mine is open because it reduces wind buffering.
-
Vented windshield
I have a 23" BRP. It really is great. Buffiting is reduced and no vacum to suck in dirt. I can open or close the vent or any setting inbetween.
-
I have to new BRP 25 inch. I had it installed at Spyderfest and am very happy with it.
-
Very Active Member
I use the BRP 23" vented for summer and the stock windshield for winter.
JT
-
Very Active Member
I bought a used Gold Wing vent to install on mine, but chickened out on cutting the opening. Afraid I would screw it up and then have to buy a new WS. If any of you are bold enough to try, I'll make you a deal.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
-
Very Active Member
Originally Posted by Glider3J
I have to new BRP 25 inch. I had it installed at Spyderfest and am very happy with it.
Who handled them at Spyderfest,Glider?...may have to have me one!
-
Yesterday
Just bought a 23 inch BRP vented one yesterday. The vent is roughly 1/2 again larger than the Goldwing vent and seems to be an excellant solution. I've used a Goldwing vent on my Harley Road Glide and it was OK and I was going to put it on my RT until I took a good look at the BRP solution. A little expensive, but combined with some adjustable wings, it has really made the RT more comfortable.
Tuck
-
Originally Posted by cyclelover63
Who handled them at Spyderfest,Glider?...may have to have me one!
Len had them at SpyderFest, but any BRP dealer can get them... or has them in stock!
-
Installed a goldwing vent on my stock windshield yesterday. I'll try it out today. The install wasn't difficult, but I was aprehensive of making the first cut. I also shortened the windshield by 2".
-
Originally Posted by ulflyer
I bought a used Gold Wing vent to install on mine, but chickened out on cutting the opening. Afraid I would screw it up and then have to buy a new WS. If any of you are bold enough to try, I'll make you a deal.
Did you get a vent for the 1500 or 1800?
Tinted or clear?....Do you still have it? If so, how much?
Last edited by stallion143; 08-06-2013 at 09:36 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|