-
Highway pegs for 2012 RT-S
Has anybody found any highway pegs that will work on the 2012 RT-S SE-5? Thanks!
-
-
Thanks Bob! I appreciate the help!
-
-
Lamonsters pegs
Looked at all out there his seem to be the easy way to go
-
Originally Posted by timmer64
Has anybody found any highway pegs that will work on the 2012 RT-S SE-5? Thanks!
Lamont's NBVs are really easy to install and from what I've seen are the most adjustable to fit you!... love em..
-
-
Pegs
I have lamonster pegs an I love them.
-
Got me the NBV's to...easy install...looks cool and works. What sold me was the fact that they were designed with the minimum impact to the Spyder, no drilling, cutting no modification.
-
Very Active Member
Originally Posted by timmer64
Has anybody found any highway pegs that will work on the 2012 RT-S SE-5? Thanks!
Lamonts will be what you want. The adjustibility and the fact that the install is the best out there. They look factory.
Happy Spyderlovers
-
lamont?
where do I see these ? Been looking for some good foot rest. I'm 6 ft. 2 and need some room to stretch out
-
I'm 6'0" and these work well for me.
Ordering info in the first post
http://www.spyderlovers.com/forums/s...021#post388021
-
Originally Posted by timmer64
Has anybody found any highway pegs that will work on the 2012 RT-S SE-5? Thanks!
Ditto what every one else said about Lamonster's pegs. An hour and a half to install for anyone handy (took me three to install these and the radiator block off plate but I never do know what I am doing and have to make a dozen trips up and down the stairs for tools). Well made and they really are nice.
Lou
Last edited by Questions; 07-17-2012 at 07:00 AM.
Reason: spelling
-
If you are looking for more than just the pegs, check out the Seal Full Floorboards - get highway peg positions and the full floorboard for even more foot position comfort. And easier on and off loading. VERY EASY install on SE models. SM, not so much......
-
Originally Posted by Huntindawg1962
If you are looking for more than just the pegs, check out the Seal Full Floorboards - get highway peg positions and the full floorboard for even more foot position comfort. And easier on and off loading. VERY EASY install on SE models. SM, not so much......
Hi Dawg,
I got that problem you had fixed. The powder coater had a micro film of clear inside the hole. The re bored them to clean it out. They work very smoothly now. I appreciate you working thru the issue on this batch of shifters. Powder coater is aware of the issue and it won't happen again. Thanks for being so understanding and sweating it thru.
Ride in comfort,
John
Seal FloorBoards
-
Originally Posted by sealfloorboards
Hi Dawg,
I got that problem you had fixed. The powder coater had a micro film of clear inside the hole. The re bored them to clean it out. They work very smoothly now. I appreciate you working thru the issue on this batch of shifters. Powder coater is aware of the issue and it won't happen again. Thanks for being so understanding and sweating it thru.
Ride in comfort,
John
Seal FloorBoards
Hey - thanks for taking the frantic calls when I thought I was doing something wrong! I was ok with that powder coat issue though- nothing a little sand paper could not fix. Just a little more putzing (technical term again) with getting that CanAm shifter off and the new one on and adjusted properly. My issue there may have actually been with that powder coating though. I will say it is worth the work though! Love the ability to move my feet around for comfort. You need to invent a "recline mode" style now
-
-
Recliner
Originally Posted by sealfloorboards
I'm working on it no. Kit will include a 55" flat screen TV , popcorn and beer holders and a French Maid (or dude) to run along beside and take care of your every need . Look for it in the next issue of Playboy Man About Town.
Recline in comfort,
John
Seal Recliners
John,
I'm in. How soon can we expect delivery?
Dick
-
NBVs
One question on the NBVs, do you have to install the block off plate or can you adjust the peg where your foot is not in front of the opening? I'm pretty sure I'll get them regardless but was wondering...
Thanks for everyone's knowledge on all threads! You've been a big help to me.
-
-
Originally Posted by sealfloorboards
I'm working on it no. Kit will include a 55" flat screen TV , popcorn and beer holders and a French Maid (or dude) to run along beside and take care of your every need . Look for it in the next issue of Playboy Man About Town.
Recline in comfort,
John
Seal Recliners
Now THAT is the spirit of MODS! (3D on the flat screen, please - and make that a "Playboy French Maid" too)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|