Turn Signal / Brake Light - LEDs installed (w/pix)

[Motavar]

Stock

My LEDs were 7w vs your 12w. hmm.

Okay do this..
Put your stock turn signals back in both front blinker spots.
I'm guessing you already cut the wire that went to the turn signal and prob have it taped up. un-tape and then try to light up the LED with the bare wires from the turn signal. Make sure you have the wires still connected to the stock turn signal.

So you should have 2 stocks running and bare wires hanging out so you can attach the LED to get it to light. The LED should light up. We're only talking an additional 12w (or 1w) depending on which LED bulb you selected.

Let me know if that works.


PS: reason I asked for who makes the LED is maybe I can order one online and try it out. There should be a way to get it to work on the Spyder.