-
Will car ramps be okay to work under a Spyder
Hi All:
I am thinking of adding underneath lighting, and what I see is I need to get under the bike to install the light strips. Would car ramps be safe and provide sufficient room to install underneath lighting?
Thanks in advance,
Jim
-
Very Active Member
Originally Posted by JimH
Hi All:
I am thinking of adding underneath lighting, and what I see is I need to get under the bike to install the light strips. Would car ramps be safe and provide sufficient room to install underneath lighting?
Thanks in advance,
Jim
Yes .... I don't know of any after-market car ramps that can't hold the weight of any Spyder ...... To achieve more space to work, I'd turn the ramps backwards, and back onto them. ...... then use a floor jack, or scissor jack under the metal mounting TABS for the rear shock ..... In VERMONT, under vehicle lighting is illegal, but maybe your State allows it?? ..... Or you could put it on a switch, so you can shut it off easily .... Good luck ... Mike
Last edited by Peter Aawen; 05-04-2024 at 04:32 AM.
-
Very Active Member
I use car ramps anytime I need to be under there.
Last edited by Peter Aawen; 05-04-2024 at 04:30 AM.
-
-
Very Active Member
Traction to back onto ramps might be an issue.
2018 RT Ltd - Asphalt Metallic - East Valley of Phoenix
2018 RT Ltd Chrome - Champagne Metallic - Lake Stevens, Wa
(Champagne/Hooker) Magic Mirrors, 360 LED head lights, BajaRon sway bar, H&R springs and shock adjusters, dash cam, foam grips, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors, sequential turn signals on front fenders, Vredestein and PPA Orb wheels on front and General out back, and driver backrest.
Things that move between machines: Ikea sheep skins, Zumo XT GPS, and extra tools. Hooker is going to be my summer trike up North; and Hookie my winter trike down South.
(Asphalt/Hookie) Elka shocks on front - BajaRon sway bar, OEM driver's backrest, LED headlights, dual USB with voltmeter, dash cam, foam grips - Magic Mirrors - front tires Vredestein Quatrac SL on PPA ORB Chrome wheels.
-
I backed onto mine with no problem. Mine are composite and have rubber tabs underneath. No problem at all.
Last edited by Peter Aawen; 05-04-2024 at 07:18 AM.
2021 RTL
-
Sure nuff Jim, it works for me every time.
-
Very Active Member
Yes
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
-
Very Active Member
I use my ATV/Motorcycle jack to lift it up, then put the ramps under it backwards so they don't interfere with me being underneath. For me, it is less hassle to jack it up & then place the ramps.
Last edited by Peter Aawen; 05-04-2024 at 12:17 PM.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Active Member
Originally Posted by BLUEKNIGHT911
Yes .... I don't know of any after-market car ramps that can't hold the weight of any Spyder ...... To achieve more space to work, I'd turn the ramps backwards, and back onto them. ...... then use a floor jack, or scissor jack under the metal mounting TABS for the rear shock ..... In VERMONT, under vehicle lighting is illegal, but maybe your State allows it?? ..... Or you could put it on a switch, so you can shut it off easily .... Good luck ... Mike
Agree with Mike....just used car ramps (backing up onto them) to change my engine oil. I put chocks under the front wheels, and add a floor jack to level the trike.
John B.
Current ride: 2020 Spyder RT-s Petrol Metallic Blue dark with OEM top case
-
Thank you to everyone who responded with advice, I really appreciate everyone taking the effort to answer and provide input.
Jim
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|