How Do I Wire BOTH Fiamm High & Low Note Horns?

[sandeejs]

So, I'd like to add a Fiamm High Note Horn to my Fiamm low note horn. Both are disc horns. I was thinking just attach one to the other. Then I thought about not exploding anything, so I thought I'd ask wiser minds.

Thanks in advance!!!!!

[hypurone]

Just run jumper wires from one to the other. You will need "piggyback" terminals to give you the secondary jumper connections to put on the first horn.... I have this currently set up on mine with two horns... Here is one option:

https://www.amazon.com/Heschen-Piggy...2942348&sr=8-6

I have had my horns installed like this since I got the byke in 2016 with NO issues... You just need to make sure the power draw is within the fuse rating.

[sandeejs]

Thanks, Hypurone. I've got a jerry rigged solution set up, pending Amazon delivery.

[ReRose]

I added dual horns on my Yamaha FJR and just made a positive and negative jumper wires that plugged into the factory harness. Never a problem but now the wife wants dual horns on her 2020 Spyder RTL so I will be laying on the ground doing the same wiring thing to her Can Am.

[BajaRon]

As long as you're using the proper wire gauge to handle the load, should be no problem with jumping from one to the other.