-
Active Member
Any Suggestions on where to place a Spyder emblem?
I have two shiny silver Spyder emblems. I'm debating on where to stick these? Does anyone have any pictures of these attached to an F3L ?
Silver_Spyder_Emblem.jpg
Last edited by Peter Aawen; 02-22-2024 at 09:31 PM.
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
-
Very Active Member
Looks like metal.
You don't have much choice, if they are metal, they will have to go on a flat, smooth area. Not many flat smooth areas on a Spyder.
-
Active Member
These are plastic. But your point is valid regardless. There are several areas that are flat, but only a few.
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
-
Very Active Member
Originally Posted by GRHorst
I have two shiny silver Spyder emblems. I'm debating on where to stick these? Does anyone have any pictures of these attached to an F3L ?
Silver_Spyder_Emblem.jpg
HI GRHorst,
How about on the frunk, or on the saddlebags, or on the trunk( if your spyder has one).
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
Well you have two so balance it out one on both sides Saddle bags maybe helps keep symmetry for pics & if is using sticky back foam tape like 3m, suggest prep cleaning bag surface with rubbing alcohol, let air dry then apply.
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Originally Posted by GRHorst
I have two shiny silver Spyder emblems. I'm debating on where to stick these? Does anyone have any pictures of these attached to an F3L ?
Silver_Spyder_Emblem.jpg
I've seen them placed on the speaker grills, doesn't affect the music that I know of.
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button"
If in Doubt, Don't Do It!
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
-
Wherever the most bugs end up or somewhere dark maybe.
-
Active Member
Yes they came with the 3M 2-sided stickies. In holding them up to the bike, the iceberg blue doesn't show them very well. But next to the black on the trunk or the black around the headlights/fog-lights, they show up much better. I never would have thought of putting on the speaker grills. As far as collecting bugs ... well ... hmmm ... cleaning bugs out of these emblems doesn't sound like an enticing task.
I'll post pictures eventually.
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
-
Active Member
Spyder Emblem Added
I ended up putting them on the back where they are easier to see and may pick up some headlight glow.
SilverSpyderEmblem-on-bike.jpg
Last edited by Peter Aawen; 02-24-2024 at 04:15 PM.
Reason: better pic
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
-
Very Active Member
Originally Posted by GRHorst
I have two shiny silver Spyder emblems. I'm debating on where to stick these? Does anyone have any pictures of these attached to an F3L ?
Silver_Spyder_Emblem.jpg
GRHorst,
On my previous Spyder (a 2014 RTS-SE6) I had one, and I placed it on the nose of the windshield, between the 2 headlights where it did not block anything.
Deanna
Last edited by Peter Aawen; 02-25-2024 at 12:10 AM.
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Active Member
Originally Posted by Deanna777
GRHorst,
On my previous Spyder (a 2014 RTS-SE6) I had one, and I placed it on the nose of the windshield, between the 2 headlights where it did not block anything.
Deanna
That was a place I considered. I wondered whether it would stay on if mounted up where it picks up more wind. Apparently it stayed on for you.
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|