Quote Originally Posted by Gwolf View Post
603 Green has a 72 hour curing time, per product data sheet provided by Locktite.
609 Green has a 24 hour curing time, per product data sheet provided by Locktite.
FWIW, Loctite primers, such as Primer N or Primer T can be used as stated on the instructions to decrease set and full cure durations. Great products I have used many times. I do believe it will increase the bond line strength also.

Just use all Loctite products with care for this pulley installation. Loctite that wicks or was accidentally applied to the spacer can bond the spacer to the shaft, or worse, possibly cause issue disassembling the gearbox if ever needed.

Green Loctite 609 is its similar cousins is a very powerful threadlocker or liquid shim when used as directed. I have witnessed 5/8 diameter studs, aerospace grade studs used to secure propellers on turboprop engines, snap off in the aluminum hubs and require edm for removal.