-
Active Member
High beams not coming on when selected or flashed - any ideas?
2014 ST-S.
Today I started the bike and did my "pre-flight" inspection and discovered that the high beam headlights would not come on when hitting the switch to either the high beam or flash settings. The low beams stayed lit in all positions.
Started checking and removing all the fuses and relays and after a few moments of switching them back and forth, the high beam function starting working again, so I attributed it to a loose connection and went upon my ride.
Upon returning home, I rechecked the high beam function and discovered it to be inoperable again. This time, I noticed that when the switch was in the high beam position, the lights would remain on in the low beam setting, however, the lights would flicker during different engine RPMs. They would remain steady as usual when in the low beam setting.
Any ideas or thoughts on what I may be checking on further?
Last edited by Peter Aawen; 08-26-2023 at 10:52 PM.
Reason: Expanded title to briefly ask the question... ;-)
-
Very Active Member
Have had similar issues & either was the H4 bulb & or loose connection at the bulb.(Found w/o fuses) Sitting on bike the Lh would stay low beam could give lens a bump/whack & would flick to H like the R side. Maybe roads or whatever but that side also burned out more frequently. Upgraded to Led in 19 & been ok so far (Knock on wood) caution fooling with as that tight space also leads to the “VOID” so if drop anything won’t find it without removing just about all front tupperware. Good luck.
** originally noticed from daylight stoplight reflection from tailgate on truck (tailgate maybe out of shape) so confirmed later, parked in front reflection at corner store, could attempt testing without singling /confusing traffic**
Last edited by Bfromla; 08-27-2023 at 03:07 AM.
Reason: **
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Scratched my answer. Not sure if the ST uses shutters or not and I discussed the headlight shutter of the RT.
Last edited by IdahoMtnSpyder; 09-02-2023 at 12:18 AM.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Originally Posted by IdahoMtnSpyder
Scratched my answer. Not sure if the ST uses shutters or not and I discussed the headlight shutter of the RT.
No shutters on ST
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|