-
Anyone tried Ryker bar-end Mirrors on an RT?
Has anyone ever attached Ryker mirrors on the ends of the handlebars on an RT?
Last edited by Peter Aawen; 03-20-2023 at 03:44 PM.
Reason: Removed Prefix - not 1330 engine specific & expanded title to briefly ask the question... ;-)
-
Very Active Member
Originally Posted by LtCol
Has anyone ever attached Ryker mirrors on the ends of the handlebars on an RT?
I have seen " handle-bar end " mirrors, which they make for snow-mobiles ..... good luck .... Mike
Last edited by BLUEKNIGHT911; 03-25-2023 at 01:26 PM.
-
Very Active Member
-
I have the big eye mirrors on my '21 RTL. Just seems natural for mirrors to be there.
-
Very Active Member
I rode a Ryker Friday for the 1st time and wondered the same thing.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
These two styles will work on the end of your handlebars. You'll just need a longer M6 screws and not use the supplied plug ends. I used a rubber washer between the mirror and bar end to prevent any possible scratching.
https://www.ebay.com/itm/35420153511...Bk9SR9Lf7cTgYQ
https://www.ebay.com/itm/39422044329...Bk9SR9bz-cTgYQ
2022 RT Sea To Sky
--------------------------------
-
Member
My Can Am dealer said they wouldn't work on my F3 so I never pursued the subject.
Last year I took advice from another forum thread and purchased some after-market end-bar mirrors from Amazon ($18). There are others out there, so I suggest you check around. I did have to get a longer bolt for them to attach to my bars. I like them a lot and use them as my primary mirrors, especially when riding 2-up. On occasion I do bump into them and have to reset, but I haven't found that to be a big deal.
KATUR Motorcycle Rear View Mirror - Note: I removed the silver "collars" and mounted the mirrors directly to the end of my bars. They look good and were an easy install.
https://www.amazon.com/dp/B01FM3CDAO...t_b_asin_title
2022 (3).jpg
Last edited by Peter Aawen; 03-21-2023 at 05:14 PM.
Reason: Fixed Link ;-)
-
Active Member
Originally Posted by narygancy
My Can Am dealer said they wouldn't work on my F3 so I never pursued the subject.
Last year I took advice from another forum thread and purchased some after-market end-bar mirrors from Amazon ($18). There are others out there, so I suggest you check around. I did have to get a longer bolt for them to attach to my bars. I like them a lot and use them as my primary mirrors, especially when riding 2-up. On occasion I do bump into them and have to reset, but I haven't found that to be a big deal.
KATUR Motorcycle Rear View Mirror - Note: I removed the silver "collars" and mounted the mirrors directly to the end of my bars. They look good and were an easy install.
https://www.amazon.com/dp/B01FM3CDAO...t_b_asin_title
2022 (3).jpg
They look great. I just ordered a pair..
-
Very Active Member
Thanks guys, that is great information.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Active Member
Dean Secord AKA seaweed
Veteran: U.S. Air Force
2015 RT-S SE6
My Mods:
TricLed Turn Signal, Squared Away Sept, 2016,SpyderPops Bump Skid, SpyderPops Missing Rock Guard, ION camera, Show Chrome Back Rest,
Show Chrome Hitch. Leesure-lite trailer, Hopnel 850 Saddlebag Liners, Hopnel 3 piece lid netset - trunk and saddlebags
Magic Brake Strobe/Flasher, DIY LED light strips on upper and lower A frames, BlueKnight911 Magic Mirrors,
DIY superior grill, USB port, Hwy pegs, DIY Flag mounts for USA and US Air Force flags,
Method to open Frunk and seat without using key, LED headlights and LED fog lights, turn signal switch safety mod
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|