-
Very Active Member
Homemade hwy foot rests.
20200822_155340.jpghwy foot rests.jpg
Made to fit me and the way I rest my feet. $7 of steel and some nuts and bolts. Just couldn't see $180 for basically the same thing.
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Very Active Member
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
SpyderLovers Sponsor
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
-
Very Active Member
Installed
Thanks Mike, one more shot installed.
Installed Hwy footrests.jpg
I would sometimes rest my foot on the water deflector but no more and now more often when on longer trips. We'll be going to the NON- Norcal NON- Rally the second week of sept. taking 2 days to get there. A few others are going to the cancelled rally site---- because ---- we can. Some cool little towns there and " the Avenue of the
Giants" ( redwoods that is)
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Very Active Member
Looks good.
You have the skills and created a functional work of art.
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Very Active Member
Thanks Dave. I've always been a fan of the KISS principle but I do like to have good, strong welds. Simple is beautiful.
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Very Active Member
Used them today on a ryde around Lake Tahoe. No changes needed, they work perfect.
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Very Active Member
Padded foot rests.
Well a change did occur anyway. I decided to use some thick, black rubber covers on the pegs. With some foam padding they just fit perfectly --- I now have padded footrests..
Lew L
Last edited by Peter Aawen; 09-08-2022 at 08:20 PM.
Reason: ' '
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Nice footrest.
-
SpyderLovers Ambassador
Foot Rests
....How about giving us some measurements and more pictures. How do you mount the Foot Rests on your Spyder?
I am interested in making a set.
Stay Healthy. ....
ENJOY YOUR TIME ON YOUR SPYDER
Ryde with a Friend and Stay Safe.
My Spyder ..... 'Little Blue-Boy'
-
Very Active Member
.
Really pretty simple if you work steel and are a good welder. Made out of 1/4" x 1 and 1and 1/4" steel strip. Taper the up right piece to fit a long 3/8" bolt. Cover the bolt with small diameter pipe and some rubber I had floating about the garage. I made them to fit my legs specifically.
They are attached to the factory floor boards on my RTS with 2 ea. 3/8" grade 5 bolts and nyloc nuts( washers of course). They are VERY solid, much more so that the $180.00 hyw pegs I seen on other 's
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|