-
Very Active Member
Are Belt Tensioners installed on new bikes same as they used to be?
Just wondering if BRP had updated them when they began installing as a factory build, as opposed to those they used to sell as an accessory? Can't seem to find them on the fiche to compare part numbers. Just a matter of curiosity on my part.
FWIW, I've read all the pros/cons about use of the belt tenioners. I recently added an OEM that I bought a couple years ago but never got around to installing, on my '16 F3T and it works for me. Plan to update to a Lamonster version sometime soon.
Last edited by Peter Aawen; 09-12-2022 at 06:05 PM.
Reason: Lamonster ;-)
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
All I know is from personal experience. I took delivery on a new 2022 Sea to Sky and I checked it and found a factory installed tension-er already in place. Prior to this bike I had a 2019 RTL and installed a Lamonster version which worked for me. I will replace the roller on the new bike with Lamonster replacement after a while.
Bartender
2022 Spyder Sea to Sky
-
Active Member
So the new Spyder RT's come with them from factory ?
-
Active Member
My 2021 F3-S SS came with a belt tensioner from the factory.
2021 Spyder F3-S Special Series
————————————————-
Monster Fuel Injection Stage II
K&N Air Filter
Lamonster Cat Delete Pipe with Baffle
Akrapovic Sinister Exhaust
Ultimate Floorboards
Baja Ron’s Anti-Sway Bar Kit
Elka Shocks Stage 3 Front, Stage 4 Rear
F4 Customs 32” Windshield
Pedal Commander
Lamonster F3 Brake Rod
Shad SH36 Side Cases
Crampbuster
-
Very Active Member
Originally Posted by Rick28
So the new Spyder RT's come with them from factory ?
Mine came from the factory with one, Rick. I believe that practice started with the ‘21 RT.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
Originally Posted by Peteoz
Mine came from the factory with one, Rick. I believe that practice started with the ‘21 RT.
Pete
From what I have read on this forum the '21's had them about mid year. I think the early year builds did not have them. I'm not for sure on that. My '22 does for sure.
2022 Petrol Metallic RT Limited / 'PYDER'
Peter Pan has struck again!
-
Very Active Member
Originally Posted by FrogmanDave
From what I have read on this forum the '21's had them about mid year. I think the early year builds did not have them. I'm not for sure on that. My '22 does for sure.
Yes, that sounds familiar, Dave. Mine was a later built 2021.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Active Member
Let's get back to the original question. Are the belt tensioners now installed by the factory different from the ones BRP was selling to us as an add on?
Happy owner of 2014 White RTS - SE6
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|